User manual KYOSHO EPSON NSX 2005 PARTS LIST

[. . . ] Written and produced by the Okidata Training & Publications Department. Please address any comments on this publication by mail to: or by email to: Training & Publications Dept. pubs@okidata. com Okidata 2000 Bishops Gate Blvd. Laurel, NJ 08054-4620 For the latest product information, printer drivers, manuals, special offers, etc. , we welcome you to visit our multilingual web site: http://www. okidata. com ii Year 2000 Compliance All products currently sold by Okidata are Year 2000 compliant. [. . . ] Use Numeric keypad (press once) Space One Touch key Hyphen key Locate the character you want on thenumeric keypad. Press that key repeatedly until the desired character appears. Press the 0/Unique key repeatedly until the character you want appears. The following characters are available: !# & ` ( ) * + , -. /:;=?äßñöüÆ Å Ø æ å ø. Press the No key to move to the next position. Press the Yes and No keys. 8 To Do This Enter numbers Enter spaces Enter Hyphens (-) Enter alphabet characters Press the Start key. The display shows NO=<OR LOCATION>. Refer to the instructions following Step 5. 10 Press the Start key to finish programming the One Touch key. 11 To continue programming One Touch keys, go back to Step 3. If the second part of the chain dial number was not programmed, enter it manually on the numeric keypad. 3 Press the Start key to begin sending the fax. 42 | Handbook Programming Your Auto Dial Directory Overview Your MFP has 70 Auto Dial numbers available for quick, twodigit selection and dialing. For each auto dial number, you can enter a fax number up to 32 digits long and a Location ID (name) up to 15 characters long. To program Auto Dial numbers: 1 2 3 4 5 Press the Select Function key. Press the 8/Location Program One Touch key. Using the numeric keypad, enter a 2-digit number (0170) for the Auto Dial number you want to program. The display briefly shows NO=<FAX NO. >, ID=<LOCATION ID> (or a previously programmed fax number and location). After the display clears, enter the fax number. Refer to the instructions below. To Do This Enter numbers Enter spaces Enter Hyphens (-) Enter pauses (i. e. , to wait for long distance or outside lines) Add a switch from pulse to tone dialing for part of the call Move the cursor or make corrections 7 8 Use Numeric keypad (press once) Space One Touch key Hyphen key Pause key */Tone key Yes and No keys 6 Press the Start key. This is a descriptive title up to 15 characters long. To Do This Use Enter numbers Numeric keypad (press once) Enter spaces Space One Touch key Enter Hyphens (-) Hyphen key Enter alphabet characters Locate the character you want on thenumeric keypad. [. . . ] Always hold the image drum unit by the ends. Never touch the surface of the green drum inside the image drum unit. Resetting the Drum Counter 6 Wait until the time, date and answering mode appear on the display. 7 Press the 7/Counter Display One Touch key. [. . . ]