User manual KYOSHO FERRARI F40 PARTS LIST

[. . . ] Mention of software products manufactured by other companies does not necessarily constitute endorsement by the manufacturer . While all reasonable efforts have been made to make this document as accurate and helpful as possible, we make no warranty of any kind, expressed or implied, as to the accuracy or completeness of the information contained herein. The most up-to-date drivers and manuals are available from the web site: http://www. www. okiprintingsolutions. com Trademark Information Oki and Microline are registered trademarks of Oki Electric Industry Company Ltd. Apple, Macintosh and Mac OS are registered trademarks of Apple Computers Inc. [. . . ] Click the [Start] button and select [Control Panel]. Select [Network and Internet Connection] and [Network Connection]. Double-click [Local Area Connection] and click [Properties] in the [Location Area Connection Status] dialogue box. If the [Internet Protocol (TCP/IP)] is not listed, click [Install. ]. In the [Select Network Component Type] dialogue box, select [Protocol] then click [Add]. In the [Select Network Protocol] dialogue box, select [Internet Protocol (TCP/IP)] then click [OK]. OkiLAN 8300e Network User's Guide Microsoft Windows - 78 7. The Windows XP installation CD-ROM may be required. Follow the remaining dialogue box prompts. Once the protocol has been installed and configured in Windows, the next step is to configure the TCP/IP parameters in the network printer. OkiLAN 8300e Network User's Guide Microsoft Windows - 79 Network printer IP address configuration Use the Admin/Manager Standard Set-up Utility to configure the IP Address, Subnet Mask and Gateway. Connect the printer to the network and turn on. Place the Network Software Utilities disk (or the software CD provided with your printer) in the CD-ROM drive. The set-up utility starts automatically. If the set-up utility does not start, double-click on setup. exe in the Windows folder of the CD-ROM. Microsoft LPR To install this port, the following needs to be carried out. Select [Start], [Settings], [Control Panel] and then select [Printers]. OkiLAN 8300e Network User's Guide Microsoft Windows - 82 2. In [Name or address of server providing lpd] type the host name or IP address of the host for the printer you are adding. In [Name of printer or print queue on that server] type the logical printer name "lp" and then click [OK]. Follow the instructions on the screen to finish installing the LPR-compatible printer. 7. 8. If the LPR port is not available, install the Microsoft TCP/IP Printing Service. Insert the printer driver for Windows NT4. 0. Select [Start][Settings][Control Panel] and then doubleclick the [Network] icon. In the Network dialogue box, click the [Services] tab. If [Microsoft TCP/IP Printing] is not listed, click [Add]. In the [Select Network Service] dialogue box, select [Microsoft TCP/IP Printing] and click [OK]. [. . . ] If there are multiple network interface cards, configure the NetWare Port names to be different. OkiLAN 8300e Network User's Guide Troubleshooting - 124 Print Server mode Check the File Server name set in the NIC and on the File Server are the same. Check the Printer name set in the File Server and the NetWare Port name set in the NIC are the same. If there are multiple NICs, configure the NetWare Port names to be different. Check the NetWare login password is correct. [. . . ]