User manual KYOSHO FW-05T

[. . . ] Replacement parts and option parts are available separately. "\ Improper usage with Alkaline cells or rechargeable batteries may damage the electronics for the car or the radio. B < In order to operate FW-05T safely, be sure to adhere to the following: Beachten Sie die folgenden Sicherheitshinweise RESPECTER LES CONSIGNES DE SECURITE SUIVANTES : Respete los siguientes consejos de seguridad: ¶ , â , ª "\ OE¯ *This shows you possibility of significant damage to life and/or body if the following explanations are not adhered. B Be sure to read thoroughly the manual before you begin. [. . . ] B , ª Adjusts the throttle in small increments so the model will not move at neutral. B , Ì Control the speed of the model and movement forward and backward. B , ª Adjusts the steering in small increments so the model will run straight. B , Í --p Transmitters other than the one included cannot be used with this product. B , Ì OEð If the batteries are loaded with improper terminals, the batteries may leak. Always use same kind and fresh new batteries. B / Check every time before driving / Vor jedem Fahrbetrieb prYfen!If the antenna is not firmly fixed, it can cause the car to go out of control Auf feste Verschraubung der Antenne im GehSuse achten!B , , Keep the front tires in the air while adjusting the steering trim. B Operate the steering wheel to check if the front tires move correctly. B , ª , à * Amount of front tire movement varies according to the amount of the steering wheel movement. If the wheel is turned all the way left or right, the front tires will also steer all the way right or left. B If turning the transmitter wheel causes the front tires to move in the direction opposite to that shown in the diagram, change the position of the Servo Reversing Switch (see page 6). B , , Keep the front tires in the air while adjusting the steering trim. B For adjusting the front tires left and right. B Precisely adjust the steering trim in case the front tires are not straight when the steering wheel is placed at neutral position. B "F, µ If forward and reverse are opposite, see if your transmitter has a servo reversing switch. If disassembling engines carelessly, their original performance may be lost!I , è 2 and 1/2 turns unscrewed from closed position (Counter Clockwise). I , è Gently screw in the idle mixture screw to closed position (Clockwise). Ensure all moving parts move without binding. Ensure the fuel lining is proof, with no cracks. [. . . ] Leaving fuel inside the engine will make engine starting difficult. B , Ì " " For reasons of safety, do not perform adjustments while the engine is running!Adjust the gear shift timing to your engine and the track with the 2. 6 x 10mm Cap screw, the shift timing becomes slow, and as you unscrew it, the shift timing becomes quick. [. . . ]