User manual KYOSHO GP AIR STREAK 500

[. . . ] 3-6 INSTALLING THE SOFTWARE Using Windows Embedded Standard . 4-4 TROUBLESHOOTING Monitor Self-Diagnosis . 5-3 MORE INFORMATION Specifications . 6-3 Correct Disposal of This Product (Waste Electrical & Electronic Equipment) . [. . . ] · <Off> - <On> Using the product 3-6 Menu Language Select a language for the OSD. Description The selected language is only applied to the product OSD. This setting does not affect the other functions of the PC. Used to set the product so that it automatically turns off at a certain time. · <Off> - <On> This menu is enabled if <Clock> is set. On Timer Used to set the product so that it automatically turns on at a certain time. · <Off> - <On> This menu is enabled if <Clock> is set. On Timer Source Used to adjust the mode when the product is automatically turned on. · <Analog> - <Client> This menu is enabled if <On Timer> is set. On Timer Volume Automatically adjusts the volume to a certain level when the product is turned on. This menu is enabled if <On Timer> is set. Display Time The OSD automatically disappears if no action is taken by the user. 4-1 Installing the Software · The Client Log off, Restart and Shutdown take effect on the operations of the EWF(Enhanced Write Filter). To keep the changed system configuration, you must save a cache for the current system session into flash memory. Failing to do so will cause the changed configuration to be lost when the client is shutdown or restarted. (In the case of logging off, the configuration is remembered when loggin in again. ) For more information on the Enhanced Write Filter, refer to the Program Help. Programs The Remote Desktop Connection You can control a running terminal server or another computer (Windows 95 or later) remotely through a remote desktop connection. · Remote Desktop · · · Windows XP Professional or Windows 2000/2003 Server must be installed on the computer to be controlled remotely. A remote computer running on an operating system later than Windows 95 is required. This remote computer is called a client. The client software for the remote desktop connection must be installed on the client. You must also be connected to the Internet. A broadband Internet connection is good for high performance. However, because the remote desktop transmits a minimum set of data including the display data and keyboard data to control the host remotely, a broadband Internet connection is not required. [. . . ] Windows Vista : Change the frequency by selecting Control Panel Appearance and Personalization Personalization Resolution Advanced settings Monitor, and then change the refresh rate under Monitor Settings. Windows 7 : Change the frequency by selecting Control Panel Appearance and Personalization Display Adjust sreen resolution Advanced settings Monitor, and then change the refresh rate under Monitor Settings. (For more information, refer to the User Manual of the computer or the graphics card. ) How can I change the resolution?Windows XP : Change the resolution by selecting Control Panel Appearance and Themes Display Settings. [. . . ]