User manual KYOSHO GP BLUESTREAK 800

[. . . ] B " , µ This kit contains many screws in and other hardware different metric sizes and shapes. B Self-tapping (TP) screws cut threads into the parts when being tightened. Excessive force may permanently damage parts when tightening TP screws. It is recommended to stop tightening when the part is securely attached or when some resistance is felt after the threaded portion enters the plastic. [. . . ] Always check the dry batteries in the radio!When the radio batteries get weak, transmission and reception decrease. You may lose control of your model when operating it with weak radio batteries. Operate the model in spacious areas with no people around!In places where children and many people gather!In rivers, lakes and other places with strong currents!Non-observance may account for personal injury and property damage!B , ð Keep in mind that people around you may also operate a radio control model! 01 NEVER share the same frequency With somebody else at the same time!Signals will be mixed and you will lose control of your model. Immediately stop the model and check the reason. as long as the problem is not cleared , do NOT operate it!This may lead to further trouble and unforeseen accidents!B , K , Ì OE¯ , Ì , ð WARNING: in order to avoid accidents and personal injury, be sure to observe the following: Because the use of gasoline and kerosene in R/C models ac-counts for fires, NEVER use them!Do NOT put fingers or any objects inside rotating and moving parts!Rotating and moving at high speed, you may be seriously injured touching them!NEVER use fuel indoors or in places with open fires and sources of heat!Store fuel ONLY in cool, dry and dark places out of childrenÕs reach!Do NOT dispose of empty fuel cans into a fire!If fuel i gets into eyes, rinse them and consult an orphamologist! Right after use, do NOT touch equipment on the model such as the engine and muffler, because they generate high temperatures!You may burn yourself seriously touching them! [. . . ] Leaving fuel inside the engine makes engine starting difficult. Read the instruction manual again and reset. remove the glow plug and vigorously pull the recoil starter to expel excess fuel. Thoroughly cool the engine, unscrew the needle valve 30¡ and start the engine again. [. . . ]