User manual KYOSHO GZ15

[. . . ] Important indicates information on avoiding damage to the appliance. This symbol refers to measures that can be taken to help protect the environment. This symbol indicates useful information and practical tips. Numbers like these indicate step - by - step instructions for using the appliance. [. . . ] · Control and function indicators: Digital displays and indicator lights provide information about settings and activated functions, as well as the presence of residual heat in the various cooking zones. · safety shutoff: A safety shutoff ensures that cooking zones switch off automatically after a period of time if the setting has not been changed. · residual heat indicator: An icon for residual heat appears in the display if the cooking zone is so hot that there is a risk of burning. · power pre-selections: You can choose pre-selected power conveniently. The automatic shutoff will also be activated if you place a damp cloth on the control panel. In both of these instances, the appliance will need to be switched on again using the main on/offcontrol sensor after the liquid or the cloth has been removed . resIdual heaT IndICaTor When an individual cooking zone or the hob is turned off, the presence of residual heat is shown with an (for "hot") in the digital display of the appropriate cooking zones. Even after the cooking zone has been switched off, the residual heat indicator goes out only after the cooking zone has cooled. You can use the residual heat for thawing or keeping food warm. Important: As long as the residual heat indicator is illuminated, there is a risk of burns. Important: If the power supply is interrupted, the symbol will go out and information about residual heat will no longer be available. However, it may still be possible to burn yourself. · Switch the cooking zones off before the end of the cooking time to use the residual heat for keeping foods warm or for thawing. Right! Wrong! usInG The TouCh ConTrol sensors To operate the touch control sensors, touch the desired panel with the tip of your pointed finger until the relevant displays illuminate or go out, or until the desired function is activated. Ensure that you are touching only one sensor panel when operating the appliance. If your finger is too flat on the panel, an adjacent sensor may be actuated as well. hob use _1 swITChInG The applIanCe on 1. Touch the lockcontrol sensor for approximately 3 seconds. approx 1 sec. . The appliance is switched on using the on/off control sensor. Touch the on/offcontrol sensor for 1 second. The digital displays will show . After the on/offcontrol sensor has been actuated to switch on your appliance, a heat setting must be selected within approximately 10 seconds. Otherwise, the appliance will switch itself off for safety reasons. seleCT CookInG zone and heaT seTTInG 1. For selecting the cooking zone, touch the corresponding cooking zone's key. . For setting and adjusting the power level ( to ) for cooking, touch the heatsetting selectors ( or ). For faster adjustment, keep your finger on the heatsettingselectors ( or ) until the required value is obtained. [. . . ] · Keep all items and materials that could melt, for example, plastics, aluminium foil and oven foils, away from the ceramic glass surface. If something of this nature melts onto the hob, it must be removed immediately with a scraper. _ cleaning and care warranty and service faQs and TroubleshooTInG A fault may result from a minor error that you can correct yourself with the help of the following instructions. Do not attempt any further repairs if the following instructions do not help in each specific case. Warning: Repairs to the appliance are to be performed only by a qualified service technician. [. . . ]