User manual KYOSHO INFERNO MP-7.5 YUICHI KANAI EDITION

[. . . ] (Receiver) Make sure the servos are in command. B Read through the manual before you begin, so you will have an overall idea of what to do. If you find any defective or missing parts, contact your local dealer or our Kyosho Distributor. [. . . ] B , É Trim the shaded portion away so the exhaust pipe can exit. Before painting, use a neutral detergent to remove any oil residues and dirt. L Refer to the pictures on the box for the color scheme. B "à Paint the body shell from the inside using KyoshoÕs spray colors. [ After painting, remove the protective film from the body shell. B Zæ , µ Slightly bend the body pins as shown in the diagram for easier removal. Adjust the front toe either by making the tie rods longer or by making them shorter. Adjust the front / rear camber either by making the upper rods longer or by making them shorter. Ensure that the length of both the left and right tie rods is the same. B Gives rear tires more grip when entering corners. B , Ì Caster Angle can be changed, with a set of 189 and 190 , instead of 61 and 62 . Ensure that the length of both the left and right upper rods is the same either by unscrewing or by tightening the set screw. I Must use together with 61 and 62 Caster (Low) becomes quicker. < " Gives the rear tires more Toe - in 3û grip when exiting corners. Place the chassis on a level surface and lift the front of the model. When setting down the model again, check if both front wheels touch down at the same time. [. . . ] Store fuel ONLY in cool, dry and dark places out of children's reach!Do NOT dispose of empty fuel cans into a fire!If fuel i gets into eyes, rinse them and consult an orphamologist! [. . . ]