User manual KYOSHO INFERNO MP777

[. . . ] 8 Make sure the servos move according to your transmitter inputs. B Read through the manual before you begin, so you will have an overall idea of what to do. [. . . ] B , Å Adjust with this screw the carburetor so it cannot close more than 1mm. T , ð After putting the cover on, loosen the screw, fit in the plastic washer and screw in the screw again. B Fill in until shock oil nearly overflows. B , , ð , é Then, gently move the piston up and down to get rid of air bubbles. B , µ , É , µ Apply instant glue little by little in the below order. B , É Trim the shaded portion away so the exhaust pipe can exit. Before painting, use a neutral detergent to remove any oil residues and dirt. L Refer to the pictures on the box for the color scheme. B "à Paint the body shell from the inside using Kyosho's spray colors. [ After painting, remove the protective film from the body shell. B Slightly bend the body pins as shown in the diagram for easier removal. B , Ì , ^ WARNING: Do NOT operate the model in the following places and situations: (Non-observance may lead to accidents!Always check the dry batteries in the radio!When the dry batteries get weaker, transmission and reception of the radio decrease. [. . . ] Store fuel ONLY in cool, dry and dark places out of children's reach!Do NOT dispose of empty fuel cans into a fire! [. . . ]