User manual KYOSHO INFERNO MP777 SP2 PARTS LIST

[. . . ] If the power source is unstable, use a voltage regulator. At least two people are needed to lift the machine safely. The actual tape/packing materials may differ somewhat from those illustrated. Keep the packing materials, they are necessary to transport the machine. [. . . ] The CIFS protocol is used in this procedure. Check the name of the computer following the procedure below, and fill it in on line C-1 of the Setup Form. 11 Referring to the Setup Form: a) Server Address: Press the right arrow key, then enter the information from line B-2. B) Use the arrow keys to select [Enter], then press <OK>. C) Your machine's email address: Press the right arrow key, then enter the information from line B-1. E) Authentication Method: Press the right arrow key, then use the down arrow kwy to select the method from line B-4. F) Continue to follow the on-screen instructions to enter the requested information from section B of the Setup Form. For details on how to use Scan To Email and Internet Fax, see the Basic User Guide on the DVD supplied with your machine. The Scan To Network PC function enables you to send and save scanned images to the "shared folder" of a computer on the network. To use this function, register your machine on the computer as a user and create a shared folder, and then create a profile on your machine to register the settings for the computer. Before starting the setup, get permission from the network administrator to create a shared 5 Close the window. 11 Right-click the folder created in the step above, and then select [Sharing and Security]. 12 Click [If you understand the security risks but want to share files without running the wizard, click here. 13 Select [Share this folder] in Windows Firewall, and then click [OK]. 14 Select the [Share this folder on the network] and [Allow network users to change my files] check box, and then click [OK]. Double-click [User] and check that the user created in step 4 is displayed. close the [Computer Management] window. Create a new folder on the computer with the name entered on line C-5. It is recommended to create the folder in the local drive, not on the desktop or [My Documents]. 8 9 15 Select the [Allow] check box for [Full Control], and then click [OK]. Right-click the folder created in step 6 and then select [Sharing]. Select [Share this folder] and then click [Permissions]. [. . . ] If [Printer Setup Utility] is already running, close it and open it again. If the name of your machine is already displayed, select it and click [Delete], and then click [Add]. 13 Select the name of your machine designated USB, then check that the name of your machine is displayed in [Print Using]. Make sure that your machine and the computer are turned on and connected. [. . . ]