User manual KYOSHO INFERNO ST

[. . . ] If you want to move to the currently selected channel, press the ENTERE button. All Information * It may differ depending on the model. English UsingChannelmenu(WatchTV) O MENUmSupportContentsHomeENTERE Press the CONTENT button to select WatchTV, then select the desired menu. Each screen will be displayed. Guide(The option may differ depending on country) The EPG (Electronic Programme Watch TV Guide) information is provided by Guide broadcasters. Using programme ScheduleManager ChannelList schedules provided by broadcasters, ChannelManager you can specify programmes you want to watch in advance so that the channel automatically changes to the selected programme channel at the specified time. Programme entries may appear blank or out of date depending on a channel status. [. . . ] When using more than one of the same type of USB, make sure the folders assigned to each USB have different names. It is recommended that you use a USB memory stick and a multi card reader when using OnTimer. The OnTimer function may not work with USB devices with a built-in battery, MP3 players, or PMPs made by some manufacturers because these devices take a long time to be recognized. English OffTimer1/OffTimer2/OffTimer 3: Three different off timer settings can be made. Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at you convenience. If you select Manual, you can set up the day you want to activate the timer. Setup Once Sun OffTimer1 Mon Tue Wed Thu Fri Sat OffTime 04 00 LMoveUAdjustEEnterRReturn The displayed image may diifer depending on the model. N The c mark indicates the day you've selected. OffTime: Set the hour and minute. English LockingProgramme O MENUmSystemSecurityENTERE Security N The PIN input screen appears before the setup screen. N Enter your 4-digit PIN, the default of which is "0-0-0-0". Change the PIN using the ChangePIN option. ChannelLock(Off/On): Lock channels in Channel Manager, to prevent unauthorized users, such as children, from watching unsuitable programme. English Only available when the Input source is set to TV. ProgramRatingLock (depending on the country): Prevent unauthorized users, such as children, from watching unsuitable programme with a userdefined 4-digit PIN code. If the selected channel is locked, the "\" symbol will be displayed. AllowAll: Unlock all TV ratings. The items of ProgramRatingLock differs depending on the country. ChangePIN: Change your password required to set up the TV. N If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to "0-0-0-0": MUTE 8 2 4 POWER(on). English PictureInPicture(PIP) O MENUmSystemPIPENTERE PIPt N NOTE You can watch the TV tuner and one external video source simultaneously. If the problem persists, refer to the external device's user manual. SignalInformation: (digital channels only) HDTV channel's reception quality is either perfect or the channels are unavailable. Adjust your antenna to increase signal strength. Troubleshooting: If the TV seems to have a problem, refer to this description. N If none of these troubleshooting tips apply, contact the Samsung customer service centre. English SoftwareUpgrade SoftwareUpgrade can be performed by downloading the latest firmware from "www. samsung. com, " to a USB memory device. CurrentVersion the software already installed in the TV. N Software is represented as "Year/ Month/Day_Version". SoftwareUpgrade CurrentVersion 2011/01/18_000001 ByUSB AlternativeSoftware StandbyModeUpgrade ----/--/--_-----:Off UMoveEEnterRReturn * It may differ depending on the model. English InstallingtheLatestVersion ByUSB: Insert a USB drive containing the firmware upgrade file, downloaded from "www. samsung. com, " into the TV. Please be careful not to disconnect the power or remove the USB drive until upgrades are complete. The TV will be turned off and on automatically after completing * It may differ depending on the model. When software is upgraded, video and audio settings you have made will return to their default settings. We advise you to write down your settings so that you can easily reset them after the upgrade. TV Rear Panel English ByChannel: Upgrade the software using the broadcasting signal. N If the function is selected during the software transmission period, software will be automatically searched and downloaded. status. N The time required to download the software is determined by the signal AlternativeSoftware(backup): If there is an issue with the new firmware and it is affecting operation, you can change the software to the previous version. StandbyModeUpgrade(Off/1hourlater/2hourslater/00:00/02:00/ 12:00/14:00): A manual upgrade will be automatically performed at selected time. Since the power of the unit is turned on internally, the screen may be turned on slightly for the product. This phenomenon may continue for more than 1 hour until the software upgrade is complete. N If the software was changed, existing software is displayed. English ContactSamsung View this information when your TV does not work properly or when you want to upgrade the software. [. . . ] For example, if an external device's output is HDMI, it should be connect to an HDMI input on the TV. Make sure your connected devices are powered on. Be sure to select the TV's correct source by pressing the SOURCE button on the TV remote. Reboot the connected device by reconnecting the device's power cable. English Issues SolutionsandExplanations RF(Cable/Antenna) Connection The TV is not receiving Make sure the Antenna cable is connected securely. Please try Plug&Play (Initial setup) to add available channels to the channel list. Go to MENU - System -Plug&Play (Initial setup) and wait for all available channels to be stored. Verify the Antenna is positioned correctly. English Issues SolutionsandExplanations Compression of video contents may cause picture The picture is distorted: macro block distortion. [. . . ]