User manual KYOSHO INFERNO US SPORTS

[. . . ] Constant displaying of still picture can cause ghosting of LCD screen, which will affect image quality. To reduce risk of this effect, please follow below recommendations: · Avoid displaying the same TV channel for long periods. · Always try do display any image on full screen, use TV set picture format menu for best possible match. · Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout process. [. . . ] (Australia only) Select the desired broadcasting signal. Press the or button, then press the ENTERE button. For more information, refer to Channel Auto Tuning. Press the ENTERE button at any time to interrupt the memorisation process. Press the ENTERE button. Enjoy your TV. If You Want to Reset This Feature. . . Select System - Plug & Play (Initial Setup). The default PIN number is "0-0-0-0". If you want to change the PIN number, use the Change PIN function. You should do Plug & Play (MENU System) again at home although you did in shop. If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to "0-0-0-0" : MUTE 8 2 4 POWER (on) English - 5 Connecting to an AV devices ¦ Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver, VCR, Digital Audio System, Amplifier, DVD Home Theatre, PC * The image may differ depending on the model. HDMI connection TV Rear HDMI OUT Using an HDMI or HDMI/DVI cable (up to 1080p) HDMI IN(DVI) x x x x If an HDMI to DVI cable is connected to the HDMI IN(DVI) port, the audio does not work. The picture may not display normally (if at all) or the audio may not work if an external device that uses an older version of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer of the external device about the HDMI version and, if out of date, request an upgrade. 4 } Blue (Index): Displays the index screen. 5 E Enter: Selects a category or sub-menu. 6 e Exit: Exit the e-Manual. 3 } Index E Enter e Exit 4 5 6 How to toggle between an e-Manual topic and the corresponding OSD menu(s). Basic Features > Changing the Preset Picture Mode (1/1) a Try Now E-MANUAL a Try Now b Home { Zoom } Index L Page e Exit Picture Picture Mode Backlight Contrast Brightness Sharpness Colour Tint (G/R) Screen Adjustment : Standard :7 : 95 : 45 : 50 : 50 : G50/R50 This function is not enabled in some menus. Method 1 1. If you want to use the menu that corresponds to an e-Manual topic, press the red button to select Try Now. Press the ENTERE button when a topic is displayed. Select Yes, and then press the ENTERE button. To return to the e-Manual screen, press the E-MANUAL button. To return to the e-Manual screen, press the E-MANUAL button. English - 10 Viewing the Contents Basic Features > Changing the Preset Picture Mode (1/1) 1 Contents Area: Contains the topic contents, if you selected a sub-menu. To move previous or next page, press the / button. 1 2 Try Now: Displays the OSD menu that corresponds to the topic. To return to the e-Manual screen, press the E-MANUAL button. 3 Home: Moves to the e-Manual home screen. [. . . ] · Make sure your connected devices are powered on. · Be sure to select the TV's correct source by pressing the SOURCE button on the remote control. · Reboot the connected device by reconnecting the device's power cable. · Replace the remote control batteries with the poles (+/­) in the right direction. [. . . ]