User manual KYOSHO INFERNO US SPORTS 2 PARTS LIST

[. . . ] 6 Connecting the Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Connect the ADF Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Connect the Ethernet Cable. . . . . . . . . . . . . . . . . . . . . . 7 Connect the Printing Unit Cable . . . . . . . . . . . . . . . . 7 Connect the Computer Cable . . . . . . . . . . . . . . . . . . . . [. . . ] Lower the cover and move the lock switch to the unlocked position. Close the cover. 6 Connecting the Cables Connect the ADF Cable Connect the ADF cable (attached to the documents cover), to the ADF port on the scan unit. Connect the Computer Cable IMPORTANT NOTE! To ensure the scan function works properly, install the Scanning Unit Driver before connecting the USB cable to your computer. Connect one end of the USB cable (long cable) to the USB port on the scanning unit. DO NOT connect the other end to your computer. Complete the connection only after installing the driver. Connect the Ethernet Cable Connect one end of your Ethernet LAN cable to an available port of your Ethernet hub. Connect the other end to the LAN port at the back of the scan unit. Connect the Scanning Unit Power Adapter 1. To mount the power adapter box to the back of the scanning unit, position the clip on the back of the box on the scanning unit frame as shown, then slide the box to the left until it locks in place. Connect the Printing Unit Cable 1. Connect one end of the USB cable (short cable) to the printing unit. 2. Be sure the power switch is in the "O" position. Connect the power adapter cable to the power port. Connect the other end to the Copy port of the scanning unit. 7 Connect the Power connector cord 1. Connect the power connector cord to the power adapter on the scanning unit. 2. · Windows 98, Windows NT, Windows 2000, Windows ME, Windows XP, HTTP or FTP server. Setting the IP Address An IP address is required to install the drivers. If you are using DHCP, the IP address will automatically be detected. If you are not using DHCP, you need to obtain the IP address from your network administrator and enter it using the front panel: 1. Print Menu appears on the LCD display. Pre Installation Information Your MFP must be set up properly on your network to perform scan to e-mail and scan to FTP functions. In order for other network devices to find the MFP on the network, the following network parameters must be set: For more information on these parameters, see the on-line User's Guide. 2. Press line 2. until Network Settings appears on 3. Using the numeric keypad, enter the IP address. . Use to move forward to the next digit or back to the previous digit. 6. Press twice to exit the menu and return to the scanning unit LCD display. Internet Communication Features Scan to E-mail The MFP allows you to deliver your scanned document to e-mail addresses on the network. The document is first scanned and converted to a standard file format, then transmitted to remote recipients simultaneously as an e-mail attachment. Scan to FTP Deliver your scanned document via the intranet. The MFP allows you to save scanned documents directly to a designated server or a personal computer on the network. 13 Installing Drivers and Network Software NOTE! To ensure the scan function works properly, DO NOT connect the USB cable to your computer until the MFP drivers have been installed. KYOSHO MFP Management (KYOSHO Network Setup Tool) ScanSoft TextBridge ScanSoft PaperPort Includes the necessary software to manage your network connected MFP plus management of your address book, individual profiles, color adjustment and LDAP management. [. . . ] To create an address book, either enter the machines's web page or install and start the Network Setup Tool in the supplied CD-ROM. Note: The address book cannot be assigned on the Control Panel. Faxing To fax documents scanned from your MFP, you must have a fax modem installed in your computer. You can use your favorite program to set up and send faxes. Or, if you are using Windows 2000 or Windows XP, you can set up the Microsoft Fax utility and send faxes only. [. . . ]