User manual KYOSHO JET ILLUSION EXPLODED VIEW

[. . . ] The images here are for reference only, and are not applicable in all cases (or countries). Shortcut to Anti-Afterimage Instructions Do not use a damaged power cord or plug or a damaged or loose power outlet. · Otherwise, this may result in electric shock or fire. Do not touch the power plug with wet hands when removing or plugging the plug into the outlet. · Otherwise, this may result in electric shock. Make sure to connect the power cord to a grounded power outlet. [. . . ] Manually adjust the backlight for the selected display. If Auto Lamp Control is adjusted, Manual Lamp Control will automatically switch to Off. z Ambient Light: Ambient Light detects ambient light intensity and automatically adjusts the screen brightness of all the LFDs in the same serial chain. Tool Settings 1 2 3 4 1 Security Panel Control Turn on or off the screen of a display device. Remote Control Enable or disable the remote control. 2 Reset Reset Picture Reset the screen settings. Reset All Reset the screen, sound and system settings at the same time. 3 Edit Column Select the items you want to display in the list of sets. 4 Information View the program information. Other Functions Resizing a Window Place the mouse pointer on a corner of the program window. Move the arrow to customize the size of the program window. Group Management Creating Groups Create groups and manage the list of sets on a group basis. Duplicate group names cannot be used. 1 2 Right-click and select Group>Edit in the display device list section on the left side of the program window. In the Edit Group window displayed, click Add on the sub level or Add on the same level. z Add on the sub level: Create a sub-group under the selected group. z Add on the same level: Create a group on the same level as the selected group. The Add on the same level button is enabled only if at least one group is created. 3 1 2 Enter the group name. Deleting Groups Select a group name, and click Edit. In the Edit Group window displayed, click Delete. 3 1 2 Click Yes. The group will be deleted. Renaming Groups Select a group name, and click Edit. In the Edit Group window displayed, click Rename. 3 If a cursor appears in the old group name, enter a new group name. Schedule Management Creating Schedules Create and register a schedule on a group basis. 1 Click All Schedule List in the schedule section on the left side of the program window. The Add button will be enabled in the middle. 2 Click the Add button. The Add Schedule window will appear. 3 Click Add below the Device Group item, and select the group you want to add a schedule to. 4 Select Date&Time/Action and click OK. DisplayPort MagicInfo - For an 460UT-2, 460UT-B model, MagicInfo can only be enabled when a network box is connected. TV - Activated when a TV tuner box is connected. 9. Adjusting the LCD Display Note The RGB/COMPONENT IN port is compatible with RGB (PC) and Component signals. However, the picture may display abnormally if the connected external input signal is different from the selected video signal. PIP Note The PIP function is not available when Video Wall is On. When external AV devices such as VCRs or DVDs are connected to the LCD Display , PIP allows you to watch video from those devices in a small window super-imposed on the PC Video signal. (Off/On) Note · · PIP turns off when the LCD Display is switched to an external source. If you select , , in Size, Position and Transparency will not be activated. PIP Turns the PIP Screen Off/On. · · Off On Source Note · · PIP is disabled if the primary screen does not receive a signal. A TV tuner box (sold separately) must be connected to use the TV. (US Only) Selects the input source for the PIP. Adjusting the LCD Display · · · · · PC : DVI / AV / HDMI1 / HDMI2 / DisplayPort DVI : PC AV : PC HDMI : PC Display Port : PC Size Changes the Size of the PIP window. Note <Size> will be changed to <16:9> when <PIP> is <On>. Position Changes the Position of the PIP window. Transparency Adjusts the Transparency of PIP windows. · · · High Medium Low Adjusting the LCD Display · Opaque Edit Name Name the input device connected to the input jacks to make your input source selection easier. [. . . ] Unit: kHz Showing the horizontal lines of the screen from the top to the bottom sequentially is called the Non-Interlace method while showing odd lines and then even lines in turn is called the Interlace method. The Non-Interlace method is used for the majority of monitors to ensure a clear image. The Interlace method is the same as that used in TVs. This is a function that provides the best quality screen for the user by allowing the computer and the monitor to exchange information automatically. [. . . ]