User manual KYOSHO MAZDA SAVANNA RX-7 FC3S

[. . . ] Mention of software products manufactured by other companies does not necessarily constitute endorsement by the manufacturer . While all reasonable efforts have been made to make this document as accurate and helpful as possible, we make no warranty of any kind, expressed or implied, as to the accuracy or completeness of the information contained herein. The most up-to-date drivers and manuals are available from the web site: http://www. okiprintingsolutions. com. Trademark Information Oki is a registered trademark of Oki Electric Industry Company Ltd. Apple, Macintosh and Mac OS are registered trademarks of Apple Computers Inc. [. . . ] Capacity Tray 1 Up to 50 thick stock sheets, depending on their thickness Not supported Tray 2 Orientation Face up Driver Thick 1 (91 to163 g/m2) Media Type Thick 2 (164 to 209 g/m2) Weight 91 to 209 g/m² (25 to 55. 9 lb) Duplexing Not supported DO NOT use thick stock that is " Mixed with any other media in Tray 1 (as this will cause printer misfeeding) 55 - C130n User's Guide Labels CAUTION Labels may stick to the fuser, causing them to peel off and media misfeeds to occur. A sheet of labels consists of a face sheet (the printing surface), adhesive, and a carrier sheet: " The face sheet must follow the plain paper specification. " The face sheet surface must cover the entire carrier sheet, and no adhesive should come through on the surface. You can print continuously with label sheets. However, this could affect the media feed, depending on the media quality and printing environment. If problems occur, stop the continuous printing and print one sheet at a time. Try printing your data on a sheet of plain paper first to check placement. Check your application documentation for more information on printing labels. Capacity Tray 1 Up to 50 label sheets, depending on their thickness Not supported Tray 2 Orientation Face up Driver Labels Media Type Duplexing Not supported Use label sheets that are " Recommended for laser printers 56 - C130n User's Guide DO NOT use label sheets that " Have labels that easily peel off or have parts of the label already removed " Have backing sheets that have peeled away or have exposed adhesive " Are precut or perforated Letterhead Stationery Try printing your data on a sheet of plain paper first to check placement. Capacity Tray 1 Up to 50 sheets, depending on their size and thickness Not supported Tray 2 Orientation Face up Driver Letterhead Media Type Duplexing Not supported Postcards Try printing your data on a sheet of plain paper first to check placement. Capacity Tray 1 Up to 50 postcards, depending on their thickness Not supported Tray 2 Orientation Face up Driver Postcard Media Type Duplexing Not supported Use postcards that are " Approved for laser printers DO NOT use postcards that are 57 - C130n User's Guide " Coated " Designed for inkjet printers " Precut or perforated " Preprinted or multicolored Note If the postcard is warped, press on the warped area before putting it in Tray 1. " Folded or wrinkled 58 - C130n User's Guide Printable Area The printable area on all media sizes is up to 4. 2 mm (0. 165") from the edges of the media. a=4. 0 mm (0. 157") Each media size has a specific printable area (the maximum area on which the machine can print clearly and without distortion). This area is subject to both hardware limits (the physical media size and the margins required by the machine) and software constraints (the amount of memory available for the full-page frame buffer). If "Short Edge" is selected, the pages will be laid out to flip at the top. 11 2 11 2 13 If "Long Edge" is selected, the pages will be laid out to flip at the sides. 13 68 - C130n User's Guide In addition, if "N-up" has been set to "Booklet", autoduplex printing is performed. The following Order settings are available when "Booklet" is selected. 1 2 If "Left Binding" is selected, the pages can be folded as a left-bound booklet. 1 3 3 1 If "Right Binding" is selected, the pages can be folded as a right-bound booklet. 2 3 1 1 2 3 Load plain paper into the tray. From the printer driver, specify the layout for duplex printing. Note With autoduplexing, the back side is printed first, and then the front side is printed. 69 - C130n User's Guide Output Tray All printed media is output to the face-down output tray on top of the printer. This tray has a capacity of approximately 100 sheets (A4/Letter) of 80 g/m2 (21 lb) paper. Note If the media is stacked too high in the output tray, your printer may experience media misfeeds, excessive media curl, or static buildup. 70 - C130n User's Guide Media Storage " Keep media on a flat, level surface in its original wrapper until it is time to load it. Media that has been stored for a long time out of its packaging may dry up too much and cause misfeeding. " If media has been removed from its wrapper, place it in its original packaging and store in a cool, dark place on a level surface. " Avoid moisture, excessive humidity, direct sunlight, excessive heat (above 35°C [95°F]), and dust. " Avoid media leaning against other objects or placing it in an upright position. Before using stored media, do a trial print and check print quality. 71 - C130n User's Guide Replacing Consumables 72 - C130n User's Guide Toner Cartridges General Information Your printer uses four toner cartridges: black, yellow, magenta, and cyan. Handle the toner cartridges carefully to avoid spilling toner inside the printer or on yourself. Note Install only new toner cartridges in your printer. If a used toner cartridge is installed, then toner remaining amount may not be accurate. [. . . ] " Specify the correct paper size in the MAIN MENU/ PAPER JAM TRAY 2 PUT "SIZE" "TYPE" IN TRAY 1 PUT "SIZE" "TYPE" IN TRAY 2 PAPER MENU/INPUT TRAY/TRAY2/MEDIA SIZE menu. TOP COVER OPEN The printer's top cover is open. Install the imaging cartridge. A imaging cartridge Replace the imaging incompatible with the machine cartridge with a correct one. X TONER LIFE END The X toner cartridge has reached the end of its life. Replace the toner cartridge. 155 - C130n User's Guide Message X TONER MISSING X TONER OUT (Ready Indicator: Off. [. . . ]