User manual KYOSHO MCLAREN F1 LM PARTS LIST

[. . . ] On the back of the printer, loosen the two screws on the controller assembly cover, then remove the cover. Align the right width guide with the paper width correctly. If the right width guide is not in place, the paper will not be properly fed and may cause a paper jam. Memory Modules: Carefully insert the module in the slot at the lower left, then gently push down on the module until the side braces close to the ends of the RAM module. [. . . ] Memory Modules: Carefully insert the module in the slot at the lower left, then gently push down on the module until the side braces close to the ends of the RAM module. Lower the MPT tray and adjust the paper guides. Compact Flash: In a similar manner to the memory module above, carefully insert the Compact Flash module in the slot on the upper right. Hard Disk Drive: Insert the HDD into the socket, being careful not to damage the fragile pins. Seat the Hard Drive over the locating pins and push firmly to secure the unit Make sure the printer is turned off. Reinstall the cover, securing it with the screws. If you purchased the optional tabloid tray or tandem tray and mounted the printer on it earlier in the installation, you now need to complete the installation. Open each drawer, remove the packing materials, and close the drawer. Insert the two locking screws and turn them clockwise to secure the tray to the printer. Pull the release button to open the front cover. Do not connect this product to an uninterruptible power supply (UPS). ) key until the display shows INFORMATION MENU. Press the NEXT (5) key until the display shows PRINT DEMO. Using the Web Browser (Optional) Use your web browser to configure print server and printer menu settings on an embedded web page. Note: For more details, see the User's Guide on the CD supplied with the printer. Click on the utilities and downloads you want to install and follow the instructions. Turn on the printer, then turn on the computer. Select any utilities you want to install. Note: If you are using USB, select KYOSHO USB and disregard step 4. Use the Web Page to Configure the Printer If you are working in a TCP/IP-enabled environment, you can use a web browser to display the printer or job printing status and to change the settings. [. . . ] Select any utilities you want to install. Note: If you are using USB, select KYOSHO USB and disregard step 4. Use the Web Page to Configure the Printer If you are working in a TCP/IP-enabled environment, you can use a web browser to display the printer or job printing status and to change the settings. Among the printer settings that are made on the control panel, settings for the system and network ports can be configured under [Printer], [Network] and [Maintenance] on the web page. [. . . ]