User manual KYOSHO MINI-Z MONSTER

[. . . ] :This symbol indicates where caution is essential to avoid injury to yourself or others. PROHIBITED :This symbol points out actions that you should NOT do to avoid possible damage or accidents. Oe First-time builders should seek the advice of experienced modellers before beginning assembly and if they do not fully understand any part of the construction. [. . . ] ^ Do NOT use water, alcohol, or thinner to clean your car's body. Simply wipe it down with a clean, soft cloth. B Do NOT install any option parts not made by Kyosho for this model. This shows you remaining amount of the battery capacity with the Power Switch turned ON. For operating Mini-Z MONSTER, be sure to use the transmitter included with this product. If it is not easy to remove the battery holder, try with a flat blade screwdriver. Always turn the transmitter's power switch ON first!Raise the tires off the ground and check that all controls are responding. Raise the tires off the ground and check that all controls are responding. Then, adjust the throttle trim until the car comes to a complete stop. Continue adjusting the throttle trim until the car makes no sound. Then, adjust the steering trim until the car moves in a straight line. You can adjust the steering angle (the degree to which tires turn) to your liking. Replace the batteries when the yellow indicator light glows. [. . . ] B -- , Ì Dust or foreign objects are inside gears. When using Spare Parts MZ-10, bend it as illustrated and then install. The optional parts should be used for the parts marked with OP . [. . . ]