User manual KYOSHO MINIUM WARBIRD SPITFIRE MK.V

[. . . ] In the interest of continually improving our products, Olympus reserves the right to update or modify information contained in this manual. The screen and camera illustrations shown in this manual were produced during the development stages and may differ from the actual product. Unless otherwise specified, the explanation about these illustrations is provided for FE-4030. Step 1 or Strap LI-42B Lithium Ion Battery Checking the contents of the box Digital camera USB cable AV cable ib CD-ROM F-2AC USB-AC adapter Other accessories not shown: Instruction Manual (this manual), warranty card. Contents may vary depending on purchase location. Step 2 4 Step 3 5 Preparing the Camera "Preparing the Camera" (p. [. . . ] Before viewing camera images on your TV, select the video output according to your TV's video signal type. Submenu 2 NTSC PAL Application Connecting the camera to a TV in North America, Taiwan, Korea, Japan, and so on. Connecting the camera to a TV in European countries, China, and so on. The factory default settings differ according to the region where the camera is sold. To play back camera images on a TV 1 Use the camera to select the same video signal system as the one of connected TV ([NTSC]/[PAL]). 2 Connect the TV and camera. Multi-connector FE-4030 FE-5030/MINIUM WARBIRD SPITFIRE MK. V Connect to the TV video input jack (yellow) and audio input jack (white). AV cable (supplied) Connector cover 3 Turn on the TV, and change "INPUT" to "VIDEO (an input jack connected to the camera). " For details on changing the input source of the TV, refer to the TV's instruction manual. EN 35 4 Press the q button, and use HI to select the image for playback. Depending on the TV's settings, the displayed images and information may become cropped. Saving battery power between shots [POWER SAVE] t (Settings 3) Submenu 2 OFF ON Cancels [POWER SAVE]. When the camera is not being used for approx. 10 seconds, the monitor automatically turns off to save battery power. POWER SAVE Application To resume standby mode Press any button. 36 EN Printing Direct printing (PictBridge*1) By connecting the camera to a PictBridgecompatible printer, you can print images directly without using a computer. To find out if your printer supports PictBridge, refer to the printer's instruction manual. *1 2 Turn on the printer, and then connect the printer and camera. FE-4030 FE-5030/MINIUM WARBIRD SPITFIRE MK. V PictBridge is a standard for connecting digital cameras and printers of different makers and printing out pictures directly. The printing modes, paper sizes, and other parameters that can be set with the camera vary depending on the printer that is used. For details, refer to the printer's instruction manual. For details on the available paper types, loading paper, and installing ink cassettes, refer to the printer's instruction manual. Connector cover Multi-connector I button USB cable (supplied) Printing images at the printer's standard settings [EASY PRINT] In the [SETUP] menu, set [USB CONNECTION] to [PRINT]. 4) EASY PRINT START CUSTOM PRINT OK 1 Display the image to be printed on the monitor. "Viewing images" (p. Insert a card with recorded images before making print reservations. DPOF reservations set by another DPOF device cannot be changed by this camera. Making new DPOF reservations with this camera will erase the reservations made by the other device. DPOF print reservations can be made for up to 999 images per card. NO DATE TIME BACK MENU SET OK 5 Use FG to select the [X] (date print) screen option, and press the H button. Submenu 2 Application This prints the image only. This prints the image with the shooting date. This prints the image with the shooting time. PRINT ORDER 1 ( 1) Single-frame print reservations [<] NO DATE TIME 1 2 Display the [SETUP] menu. "Using the Menu" (p. 4) From the playback menu q, select [PRINT ORDER] and then press the H button. PRINT ORDER SET CANCEL BACK MENU SET OK < U 6 SET OK Use FG to select [SET], and press the H button. EXIT MENU 40 EN Reserving one print each of all images on the card [U] Resetting the print reservation data for selected images 1 2 3 Follow Steps 1 and 2 in [<] (p. Use FG to select [U], and press the H button. Follow Steps 5 and 6 in [<]. 1 2 3 4 Follow Steps 1 and 2 in [<] (p. Use FG to select [<], and press the H button. Use FG to select [KEEP] and press the H button. [. . . ] Any defect or damage that occurs due to transport, a fall, shock, etc. Any defect or damage that occurs due to fire, earthquake, flood damage, thunderbolt, other natural disasters, environmental pollution and irregular voltage sources. Any defect that occurs due to careless or improper storage (such as keeping the product under conditions of high temperature and humidity, near insect repellents such as naphthalene or harmful drugs, etc. ), improper maintenance, etc. Any defect that occurs due to exhausted batteries, etc. [. . . ]