User manual KYOSHO MINIZ OVERLAND EXPLODED VIEW

[. . . ] In the interest of continually improving our products, Olympus reserves the right to update or modify information contained in this manual. The screen and camera illustrations shown in this manual were produced during the development stages and may differ from the actual product. Step Checking the contents of the box 1 Strap Two AA batteries USB cable Digital camera AV cable ib CD-ROM Other accessories not shown: Instruction Manual (this manual), warranty card. Contents may vary depending on purchase location. Step Preparing the Camera "Preparing the Camera" (p. 10) 2 4 Step Shooting and Playing Back Images "Shooting, Viewing, and Erasing" (p. [. . . ] This prints one image in a multiple layout format. This prints an index of all images stored in the internal memory or card. This prints images based on the print reservation data on the card. SINGLE PRINT NORM 14M 100 0004 '10/02/26 12:30 FILE PRINT OK MORE 6 7 Use HI to select an image. Press F to make a print reservation for the current image. Press G to make the detailed printer settings for the current image. To make the detailed printer settings 1 Use FGHI to select the setting, and press the H button. PRINT INFO <x DATE FILE NAME P EXIT MENU 1 WITHOUT WITHOUT [PRINT ORDER] is available only when print reservations have been made. "Print Reservations (DPOF)" (p. 40) 4 Use FG to select [SIZE] (Submenu 3), and press I. If the [PRINTPAPER] screen is not displayed, the [SIZE], [BORDERLESS], and [PICS/SHEET] are set to the printer's standard. PRINTPAPER SET OK SIZE STANDARD BORDERLESS STANDARD BACK MENU SET OK 38 EN Submenu 5 <× Submenu 6 0 to 10 Application This selects the number of prints. Selecting [WITH] prints the images with the date. Selecting [WITHOUT] prints the images without the date. Selecting [WITH] prints the file name on the image. Selecting [WITHOUT] does not print any file name on the image. *1 Dew drops can form in the camera when it is suddenly taken from a cold location into a warm, humid room. Troubleshooting Battery "The camera does not work even when batteries are installed". "Vertical lines appear on the screen". Insert new or recharged batteries in the correct direction. "Inserting the battery and the SD/SDHC memory card (sold separately)" (p. 10) This condition may occur when the camera is pointed at an extremely bright subject under a clear sky and so on. The lines do not appear, however, in the final image. If [ALKALINE] is selected with NiMH batteries, the camera may fail to turn on when the batteries are low. Be sure the batteries are fully charged, and select [NiMH] for [BATTERY TYPE]. 36) "The light is caught in the picture". Shooting with flash in dark situations results in an image with many flash reflections on dust in the air. Battery performance may have been reduced temporarily due to low temperature. Take the batteries out of the camera, and warm them by putting them in your pocket for a while. Date and time function "Date and time settings return to the default setting". If the batteries are removed and left out of the camera for about a day*2, the date and time settings return to the default setting, and must be reset. *2 The time until the date and time settings return to the default setting varies depending on how long the batteries have been loaded. "Setting the date, time and time zone" (p. 12) Card/Internal memory "An error message is displayed". "Error message" (p. 43) Shutter button "No picture is taken when the shutter button is pressed". Miscellaneous "The camera makes a noise when taking pictures". Cancel sleep mode. To save battery power, the camera automatically goes into sleep mode and the monitor turns off if there is no operation for 3 minutes when the camera is turned on. [. . . ] Any defect that occurs due to mishandling (such as an operation performed that is not mentioned in the Handling Care or other sections of the instructions, etc. ) b. Any defect that occurs due to repair, modification, cleaning, etc. performed by anyone other than Olympus or an Olympus authorized service station. Any defect or damage that occurs due to transport, a falI, shock, etc. [. . . ]