User manual KYOSHO MR-02

[. . . ] Please read carefully before assembling and operating your model. :This symbol indicates where caution is essential to avoid injury to yourself or others. [. . . ] During and after operation, the motor and batteries will be hot. Do not touch them until they have had time to cool down. B Please do not operate on the same band (frequency) as other models close by as loss of cotrol will result. Such surfaces can damage its operating parts. ^ Do NOT use water, alcohol, or thinner to clean your car's body. Simply wipe it down with a clean, soft cloth. B Do NOT install any option parts not made by Kyosho for this model. This shows you remaining amount of the battery capacity with the Power Switch turned ON. For operating Mini-Z Racer, be sure to use the transmitter included with this product. 3 Carefully spread the sides of the body over the chassis mounts. Always turn the transmitter's power switch ON first!Raise the tires off the ground and check that all controls are responding. Raise the tires off the ground and check that all controls are responding. Then, adjust the throttle trim until the car comes to a complete stop. [. . . ] Acceleration and Top Speed can be adjusted by replacing the Pinion Gear The Motor Guide also must be changed as shown in the drawing. When using Spare Parts MZ-10, bend it as illustrated and then install. [. . . ]