User manual KYOSHO MR-03

[. . . ] If you want to move to the currently selected channel, press the ENTERE button. English Using Channel menu O MENUm Support Contents Home ENTERE Press the CONTENT button to select the desired menu. Each screen will be displayed. Channel List You can view channel information, All, TV, Radio, Data/Other, Analogue or Favourites 1-5. N When you press the CH LIST button on the remote control, Channel List screen will be displayed at once. Contents Home Channel List Guide AllShare Play Schedule Manager Source R Return * The displayed image may differ depending on the model. English All: Shows all currently available channels. TV: Shows all currently available TV channels. Radio: Shows all currently radio channels. [. . . ] Volume: Set the desired volume level. English Source: Select TV or USB content to be played when the TV is turned on automatically. (USB can be selected only when a USB device is connected to the TV) Aerial (when the Source is set to TV): Select ATV or DTV. Channel (when the Source is set to TV): Select the desired channel. Music / Photo (when the Source is set to USB): Select a folder in the USB device containing music or photo files to be played when the TV is turned on automatically. N NOTE If there is no music file on the USB device or the folder containing a music file is not selected, the timer function does not operate correctly. English When there is only one photo file in the USB device, the slide show will not play. If a folder name is too long, the folder cannot be selected. Each USB you use is assigned its own folder. When using more than one of the same type of USB, make sure the folders assigned to each USB have different names. It is recommended that you use a USB memory stick and a multi card reader when using On Timer. The On Timer function may not work with USB devices with a built-in battery, MP3 players, or PMPs made by some manufacturers because these devices take a long time to be recognized. English Off Timer 1 / Off Timer 2 / Off Timer 3: Three different off timer settings can be made. Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at your convenience. If you select Manual, you can set up the day you want to activate the timer. N The c mark indicates the day you've selected. Time: Set the hour and minute. English Locking Programme Security O MENUm System Security ENTERE N The PIN input screen appears before the setup screen. Change the PIN using the Change PIN option. Channel Lock (Off / On): Lock channels in Channel menu to prevent unauthorized users, such as children, from watching unsuitable programme. N Available only when the Source is set to TV. English Programme Rating Lock (depending on the country): Prevent unauthorized users, such as children, from watching unsuitable programme with a userdefined 4-digit PIN code. If the selected channel is locked, the "\" symbol will be displayed. N Optimum condition for pixel shift Item Horizontal Vertical Time (minute) 0~4 0~4 1~4 min TV / HDMI 4 4 4 min English N The Pixel Shift value may differ depending on the monitor size (inches) Auto Protection Time (Off / 10 min / 20 min / 40 min / 1 hour): If the screen remains idle with a still image for a certain period of time defined by the user, the screen saver is activated to prevent the formation of ghost images on the screen. N and mode. This function is not available in the Screen Fit mode. Scrolling: This function removes after-images on the screen by moving all the pixels on the PDP according to a pattern. Use this function when there are remaining after images or symbols on the screen, especially when you displayed a still image on the screen for a long time. English N The after-image removal function has to be executed for a long time Side Grey (Light / Dark): When you watch TV with the screen ratio set to 4:3, the screen is prevented from any damage by adjusting the white balance on both extreme left and right sides. N (approximately 1 hour) to effectively remove after-images on the screen. If the after-image is not removed after performing the function, repeat the function again. Press any key on the remote control to cancel this feature. English General O MENUm System General ENTERE Game Mode (Off / On): When connecting to a game console such as PlayStationTM or XboxTM, you can enjoy a more realistic gaming experience by selecting game mode. N NOTE Precautions and limitations for game mode To disconnect the game console and connect another external device, set Game Mode to Off in the setup menu. If you display the TV menu in Game Mode, the screen shakes slightly. English Game Mode is not available in TV mode. After connecting the game console, set Game Mode to On. Unfortunately, you may notice reduced picture quality. If Game Mode is On: Picture Mode is set to Standard and Sound Mode is set to Movie. Panel Lock (Off / On): Lock or unlock all the keys on the panel. Boot Logo (Off / On): Display Samsung logo when the TV is turned on. English DivX Video On Demand O MENUm System DivX Video On Demand ENTERE Shows the registration code authorized for the TV. If you connect to the DivX web site and register with 10-digit registration code, you can download the VOD activation file. Once you play it using Videos, the registration is completed. N For more information on DivX VOD, visit http://vod. divx. com. English Common Interface O MENUm System Common Interface ENTERE CI Menu: This enables the user to select from the CAM-provided menu. Select the CI Menu based on the menu PC Card. Application Info: View information on the CAM inserted into the CI slot and on the "CI or CI+ CARD" which is inserted into the CAM. [. . . ] The TV operates the OTA (Over The Aerial) function itself to upgrade firmware downloaded whilst your watching TV. If you are using a CAM CARD (CI/CI+), check that it is installed into the common interface slot. If there is still a problem, pull the CAM CARD out of the TV and insert it into the slot again. The message "Scrambled Signal" or "Weak or No Signal" appears. English Issues There are recurrent picture/sound issues. A reaction may occur between the rubber cushion pads on the base stand and the top finish of some furniture. [. . . ]