User manual KYOSHO MR02 ARR MINI-Z CUP EDITION

[. . . ] Mention of software products manufactured by other companies does not necessarily constitute endorsement by the manufacturer . While all reasonable efforts have been made to make this document as accurate and helpful as possible, we make no warranty of any kind, expressed or implied, as to the accuracy or completeness of the information contained herein. The most up-to-date drivers and manuals are available from the web site: http://www. okiprintingsolutions. com Trademark Information _______________________________ Oki and Microline are registered trademarks of Oki Electric Industry Company Ltd. Apple, Macintosh and Mac OS are registered trademarks of Apple Computers Inc. [. . . ] Form Length This submenu allows you to choose the paper length. Top Position This submenu allows you to shift the image down in 0. 1 inch increments. Left Margin This submenu allows you to shift the image to the right in 0. 1 inch increments. Fit To Letter This submenu allows you to fit the image to letter size paper. 11 inch 11 inch 11. 7 inch 12 inch Press < > or < > buttons to scroll through the selections. Press <SELECT> to save the selection. 0 inch 0 inch 0. 1 inch 0. 2 inch || 1. 0 inch Press < > or < > buttons to scroll through the selections. Press <SELECT> to save the selection. 0 inch 0 inch 0. 1 inch 0. 2 inch || 1. 0 inch Press < > or < > buttons to scroll through the selections. Press <SELECT> to save the selection. Disable Disable Enable Press < > or < > buttons to scroll through the selections. Press <SELECT> to save the selection. MR02 ARR MINI-Z CUP EDITION User's Guide> 69 Parallel Menu The Parallel Menu provides access to the Parallel settings. Use the following procedure to enter the parallel menu: 1. Press the MENU button on the control panel. Press the < > button until the text "Parallel Menu" is shown on the second line of the display. Press <SELECT> to save the selection. RTS Error Off Off On Press < > or < > buttons to toggle between Off and On. Press <SELECT> to save the selection. XON Ready/ Busy On Off On Press < > or < > buttons to toggle between Off and On. Press <SELECT> to save the selection. MR02 ARR MINI-Z CUP EDITION User's Guide> 72 Submenus Default Setting On Available Settings Off On Procedure for Changing Setting Press < > or < > buttons to toggle between Off and On. Press <SELECT> to save the selection. XON On1/Off1 XON Error Off Off On Press < > or < > buttons to toggle between Off and On. Press <SELECT> to save the selection. DTR Polarity High High Low Press < > or < > buttons to toggle between High and Low. Press <SELECT> to save the selection. RTS Polarity High High Low Press < > or < > buttons to toggle between High and Low. Press <SELECT> to save the selection. Robust XON Off Off On Press < > or < > buttons to toggle between Off and On. Press <SELECT> to save the selection. PS Protocol ASCII ASCII RAW Press < > or < > buttons to toggle between ASCII and RAW. Press <SELECT> to save the selection. MR02 ARR MINI-Z CUP EDITION User's Guide> 73 USB Menu The USB Menu provides access to the USB settings. Use the following procedure to enter the USB menu: 1. Press the MENU button on the control panel. [. . . ] If a sheet of paper is wrapped around the heat roller, do not try to remove it bym yourself to avoid injuries or burns. Switch off the machine immediately, and contact service. · Remove any remaining pieces of paper. · Remove any dust or stains with a clean dry cloth. Cleaning the Feed Roll When feeding cannot be done, follow the procedure below to wipe the feed roll gently with a well-wrung soft cloth. MR02 ARR MINI-Z CUP EDITION User's Guide> 132 There are feed rolls in the interior of this printer (two locations, total of four), tray module (one location) and paper tray (one location). TJ094ano_text. jpg A B C D A Feed rollers (1) B Inside of machine (two locations) (2) Open Cover A and after removing the drum/toner cartridge, clean the feed roller. [. . . ]