User manual KYOSHO OPEN INTERFACE TOM SC430

[. . . ] While all reasonable efforts have been made to make this document as accurate and helpful as possible, we make no warranty of any kind, expressed or implied, as to the accuracy or completeness of the information contained herein. For latest information please see these web sites: Oki Europe: http://www. okieurope. com Oki Americas Inc. : http://www. okidata. com Copyright © 2004 Oki Data Americas. Oki and Microline are registered trademarks of Oki Electric Industry Company, Ltd. Energy Star is a trademark of the United States Environmental Protection Agency. [. . . ] When illuminated, the printer is ready to receive data from the computer. Displays menu values, printer status and error messages. When illuminated, there is a malfunction in the printer. The indicator is illuminated when the printer is in power save mode. Press to enter offline status, in which the printer cannot receive data or process printing data. Press again to exit offline status and enter online status, in which the printer can receive data from the computer. INSTALLATION AND RELOCATION PROCEDURE > 43 No. Name 9 < < >< >< > > buttons Description Press these to move to the required menu, item and required value on the display. Also, press the < > button when you are carrying out secure/sampled/delayed printing or when you are checking/printing received mail manually. Note: When you are changing the candidate values by the < > < > buttons, you can press and hold down the buttons to change the display continuously. Also, pressing the < > < values. > buttons simultaneously displays the default NAVIGATING THE CONTROL PANEL MENUS Display/Close the Menu screen Switch between the menu levels Switch between menus or items in the same level <MENU> button < > button (moves one level downwards) or < (moves one level upwards) > button > < > button (displays the previous menu or item) or < button (displays the next menu or item) Move the cursor (_) of the < > button (moves to the right) or < setting value to the right or left the left) Confirm setting <FEED/SELECT> button > button (moves to When you press the MENU button on the control panel, you enter the printer's menu system. For details on the settings, refer to the NIC Configuration Guide. Boot your computer, and start the web browser. Enter the printer's IP address or URL in the address input column on the web browser and press the <Enter> key. Using Online Help For details regarding the items that can be set in each screen, click the [Help] button to display the Online Help. INSTALLATION AND RELOCATION PROCEDURE > 47 INSTALLING THE PRINTER DRIVER To print from the computer, install the printer driver and other required software. The installation procedure(s) you will use for your printer vary according to operating system, usage of the USB port, and network connection. Instructions for installing drivers on Windows and Macintosh operating systems are given below. Solaris, Linux and HP-UX are dealt with in other parts of your documentation. MICROSOFT WINDOWS SYSTEMS NOTE For network installation information, see the Network User Guide on the CD-ROM. Click the Documentation/Network User's Guide buttons. Make sure the cable is connected to your printer and PC and your printer is turned OFF. Insert the driver CD supplied with your printer into your CDROM drive. (If it doesn't, click Start Run Browse. Browse to your CD-ROM drive and doubleclick Install. exe, click OK. ) The License Agreement appears. [. . . ] Oki Data will repair (or at its option, replace) at no charge, any defective component(s) of the Printer for one (1) year from the date of purchase. This Limited Warranty extends to the original purchaser only. This Limited Warranty does not extend to consumable items. ON-SITE REPAIR Note: On-Site Repair is available in the United States and Canada only. [. . . ]