User manual KYOSHO PITTS SPECIAL S 2C50 PARTS LIST

[. . . ] Mention of software products manufactured by other companies does not necessarily constitute endorsement by the manufacturer . While all reasonable efforts have been made to make this document as accurate and helpful as possible, we make no warranty of any kind, expressed or implied, as to the accuracy or completeness of the information contained herein. The most up-to-date drivers and manuals are available from the web site: http://www. okiprintingsolutions. com Trademark Information Oki and Microline are registered trademarks of Oki Electric Industry Company Ltd. Apple, Macintosh and Mac OS are registered trademarks of Apple Computers Inc. [. . . ] Follow the remaining dialogue box prompts. Windows 2000 1. Click the [Start] button, select [Settings] and then click on [Network and Dial-up Connections]. Double-click the [Local Area Connection] icon. In the [Local Area Connection Status] dialogue box, click the [Properties] button. OkiLAN 7120e Network User's Guide 35 1. 4. If the TCP/IP protocol is not listed, in the [Local Area Connection Properties] dialogue box, click the [Install] button. In the [Select Network Component Type] dialogue box, select [Protocol] and click the [Add] button. In the [Select Network Protocol] dialogue box, select [TCP/IP Protocol] and click the [OK] button. Click the [Close] button in the [Local Area Connection Properties] dialogue box. Click the [Close] button in the [Local Area Connection Status] dialogue box. Windows XP 1. Click the [Start] button and select [Control Panel]. Select [Network and Internet Connection] and [Network Connection]. Using NetBEUI makes it easy to manage your Oki product and print within the network environment of Windows. If everything is correct, select [Execute] to apply the configuration. Select [Finish]. Now that both Windows and the printer have been configured to use TCP/ IP, the next step is to configure Windows to print to the network printer. Configuring Windows for Network Printing Windows 95/98/Me When printing using TCP/IP the OkiLPR utility is the only option to use. When installing the driver, ensure it is installed as a local printer and not a network printer. Ensure the appropriate printer driver has been installed in Windows. Install the OkiLPR utility as described on page 31 of this manual and add the printer installed earlier. Windows NT 4. 0 With Windows NT 4. 0, you have two options for printing using TCP/IP. They are: > > OkiLPR Microsoft LPR In order to use Microsoft LPR, it must first be installed into your operating system. NT 4. 0 requires administrator privileges. OkiLAN 7120e Network User's Guide 38 OkiLPR Please follow the procedure described in the Windows 95/98/Me section on page 38. Microsoft LPR To install this port, the following needs to be carried out. 1. 8. Select [Start], [Settings], [Control Panel] and then select [Printers]. In [Name or address of server providing lpd] type the host name or IP address of the host for the printer you are adding. In [Name of printer or print queue on that server] type the logical printer name "lp" and then click [OK]. Follow the instructions on the screen to finish installing the LPR-compatible printer. If the LPR port is not available, install the Microsoft TCP/IP Printing Service. [. . . ] The Printer name printed is the Logical Directory name. NetWare Computer cannot find the network interface card. Turn the printer off and on again. Confirm the network interface is enabled on the printer. OkiLAN 7120e Network User's Guide 69 Check the network cable is correctly connected. The green LED near the network interface should be lit. [. . . ]