User manual KYOSHO PORSCHE 911 GT1

[. . . ] 8 Control Panel Menu Structure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Using the Disk Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Using the PCL and PostScript Power-On Files Feature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Using the Hard Disk as a PostScript Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Take extra care working with ESD-sensitive parts when cold weather heating is used because low humidity increases static electricity. WARNING: To prevent the danger of electric shock, before installing any options be sure to turn the power switch of the printer to the off [O] position and disconnect the power cord from the wall outlet. Chapter 1 Installation Features of the Hard Disk Option The Hard Disk Option for your printer provides the following: · Quick and easy installation requiring no tools · 10 GB capacity · Storage of PostScript files and/or storage of PCL power-on files (see page 10) · Control panel menus enable fast and easy file manipulation (see page 8). Installing the Hard Disk NOTE: Carefully review the safety precautions on page iii before starting this installation procedure. KYOSHO Hard Disk User Guide Chapter 1: Installation 2 Remove the Side Panel from the Printer 1. Turn the printer power switch (1) OFF (O position), then unplug the power cord from the AC outlet (2). 2. Loosen the thumbscrews at the top and bottom of the side cover by turning them in a counter-clockwise direction. 3. Slide the cover towards the rear of the printer, then down to remove it. KYOSHO Hard Disk User Guide Chapter 1: Installation 3 Install the Hard Disk in the Bracket CAUTION: Handling ESD-Sensitive Parts The Hard Disk is sensitive to electrostatic discharge (ESD). Keep the Hard Disk drive in its original shipping container until you are ready to install it. Minimize your movements to prevent build up of static electricity. Use an ESD wrist strap on your wrist if available. Connect the wrist band to the system ground point. This discharges any static electricity in your body to the machine. Hold the Hard Disk by its edge connector cover; do not touch the pins. Do not place the Hard Disk on any metal surface; if you need to put it down for any reason, first put it into its special bag. 1. Place the bracket on a flat area protected against static electricity. 2. Print This selection reads the selected file from the Hard Disk and prints it as if it were being received from one of the input ports. Delete This selection deletes the selected disk file or directory from the Hard Disk. To delete an entire directory, you must first delete all the files within that directory. Format Disk This selection reformats the Hard Disk. CAUTION!All files on the Hard Disk are deleted if this function is selected. Disk Summary This selection prints a page containing information about the Hard Disk including a list of all the current files and directories. Using the PCL and PostScript Power-On Files Feature Power-on Files Defined Your printer can store files on the Hard Disk which can be read and interpreted at power-on. Such power-on files can contain either PCL or PostScript language content. Examples of power-on files include soft fonts, and macro/overlay definitions. NOTE: Power-on files are processed only at power-on initialization and not at the start of every print job. Contact the technical support organization at your point of purchase for full details about the power-on files feature. KYOSHO Hard Disk User Guide Chapter 2: Using the Hard Disk 11 Using the Hard Disk as a PostScript Device In order to allow PostScript® programs to access the Hard Disk, a full implementation of a PostScript storage device is provided. This section discusses an overview of the PostScript operators and parameter sets that are included. For detailed information on using the operators/parameter sets, please refer to the following publications (available on the Adobe® web site, www. adobe. com): · PostScript Language Reference Manual · Adobe PostScript 3 Version 3010 Product Supplement Device Name and Priority The device name assigned to the Hard Disk option is %disk0%. · If both the Hard Disk and the Flash SIMM options are installed, both can be referenced uniquely by name. · If no device name is specified in the PostScript operation, the SearchOrder parameter in the device parameter set establishes the priority for file operations. [. . . ] NOTE: This parameter can be read or written using the dosysstart and setdosysstart operators. Each time the printer is powered on, if the StartupMode parameter is set to 1, the Hard Disk is searched for a file called Sys/Start, a file named Start in a path called Sys. If this file is found, it is read and parsed by the PostScript interpreter. Again, it is up to the PostScript programmer to create the content of this file and get the file onto the Hard Disk the PostScript device and file operators. Chapter 3 Service & Support First . . . Consult the store where you purchased your Hard Disk. Additional KYOSHO Resources: Available 24/7 · Visit our multilingual web site www. okidata. com. · Call 1-800-654-3282 Have the following information ready: · Your phone number, fax number and shipping address. [. . . ]