User manual KYOSHO PURETEN EP ALPHA 3 4WD

[. . . ] B Specifications are subject to be changed without prior notice!^Ó ^µ, ¢ Required for operation / Das notwendige Zubehör / Matériel nécessaire / Material necesario 2~3 3 4 5~18 19~23 Radio preparation / Die RC-Anlage / Préparation de la radio / Preparación Equipo de Radio Before you begin / Bevor Sie beginnen / Avant de commencer / Antes de empezar Assembly / Das Bauen / Assemblage / Montaje Operating your model safely / Zu Ihrer Sicherheit / Consignes de sécurité / Consejos de seguridad Oe For more information on the radio, refer to its instruction manual. J CAUTION: Only use a surface radio with 2 channels and electronic speed controller! [. . . ] B Confirm that each piston moves up and down smoothly. B , , ð , é Move the piston up and down to get rid of air bubbles. B , Ä To more easy fit 42 to 40, carefully prise 43 apart with a screwdriver. B , ð 'è Tighten the screws with one sheet of paper inserted between both gears. [ 'è Ensure cords are kept away from moving parts. B Always run your car with the body shell fitted!Do not run your car on ground: · WARNING: Do NOT operate the model in the following places and situations: (Non-observance may lead to accidents!Operate your model ONLY in spacious areas with no people around!In places where children and many people gather!* Non-observance may account for personal injury and property damage!Radio reception will be reduced if weak batteries are used, You may lose control of your car when running this way and this could lead to accidents. Keep in mind that people around you may also operate a radio control model!NEVER share the same frequency with somebody else at the same time!Signals will be mixed and you will lose control of your model. [. . . ] When NOT using the model, always switch off the receiver and transmitter !Furthermore, disconnect the Ni-Cd battery and remove it from the model !Bateria NiCd descargada Electronic speed controller is not properly adjusted. [. . . ]