User manual KYOSHO PURETEN GP FAZER MCLAREN F1 GTR

[. . . ] While all reasonable efforts have been made to make this document as accurate and helpful as possible, we make no warranty of any kind, expressed or implied, as to the accuracy or completeness of the information contained herein. Other product names and brand names are registered trademarks or trademarks of their proprietors. 3, Ethernet-II and SNAP and can detect those frame types automatically. also , it supports major protocols such as TCP/IP , IPX/SPX (NetWare) , EtherTalk and NetBEUI. [. . . ] When the installation ends, the [Setup complete] screen is displayed. check [Yes , I want to launch KYOSHO LPR Utility now] and click [Finish]. Check [Yes, I want to view the ReadMe File] if you want to read [Readme]. Select [Printer] to accept the printer that has been added in the step 1. Enter an IP address at [IP Address] and click [OK]. Refer to the On-line Help for information on how to use the utility. When the deletion has finished, the [Uninstall Complete] screen is displayed. If a file that has been added after installation exists in the folder to install the KYOSHO LPR utility or the folder to spool, you cannot delete the folder. Delete any unwanted files before running [Uninstall KYOSHO LPR Utility]. This chapter provides guidelines on how to print over the network from various Microsoft Windows platforms. There are numerous ways of printing from Windows and the exact set-up will vary depending upon your environment. When using lpr in UNIX and other TCP/IP environments, please select [Yes]. To use in a TCP/IP environment, an IP address should be assigned to the Ethernet board. If [Yes] has been selected and TCP/IP is the only working protocol and the IP address has not already been assigned, you can either obtain an IP address automatically or assign an IP address. When [Obtain an IP address automatically] is selected, the device IP address will be automatically assigned by the DHCP server. In an environment without a DHCP server, please assign the IP address manually. If you are assigning an IP address, you need to enter: >An IP address >Submit mask >Gateway address. Consult your network manager to ensure that the NetWare file server is properly installed and working on the network. Make sure that NetWare Client32 or IntranetWare Client is installed on your computer. On selecting [Yes] you will be asked if [You set-up the queue from the Wizard]?Using NetBEUI makes it easy to manage your KYOSHO product and print within the network environment of Windows. If everything is correct, select [Execute] to apply the configuration. [. . . ] The last six digits of the Ethernet address are unique to each card. In Mac OS X you use the Print Center to select network printers, not the Chooser. From th Printer Model drop down menu, select your printer model. The network addresses used in this manual are shown for example only. [. . . ]