User manual KYOSHO SIRIO S09-R

[. . . ] For more information, check with your System Administrator or see the on-line User's Guide provided with your system. Use the numeric keypad to set the number of copies (up to 99). Use the numeric keypad to set the number of copies (up to 99). Note See the next page for a summary of the setting tree in the menu. [. . . ] Before sending your document to a file server, profiles should be set up to speed the process. a profile contains a list of filing parameters such as your filing protocol , directory , file name . And other scanning parameters, up to 50 profiles can be set. Use this feature to perform a pull scan controlled from a Windows PC connected to the MFP via USB. Use the touch screen menu to enter network information and alter the scan output to suit your needs. Your system can be used for · By creating F code boxes (up to 20 are available), along with associated sub addresses and passwords, you can perform · Use the numeric keypad to type in the number, then press Enter, or · Select the number from the speed dial list, or · Press Others on the touch screen, then press Group Tx and select from the group list. Use the touch screen to set parameters for sending the fax. See the next page for a summary of the Fax setting tree in the menu. , date and time) has already been programmed into the unit. For more information, consult the on-line User's Guide on the CD supplied with the unit. Where applicable, the defaults are in bold italic. Use the LED cleaner provided with the toner cartridges or a soft, lint-free cloth to gently wipe each of the four LED heads. From time to time the Automatic Document Feeder (ADF) pad assembly and feed rollers may become dirty. In this case the ADF may not feed documents smoothly. Carefully pull lever (1) and open the ADF top cover (2). Moisten a soft, clean, lint-free cloth and wipe the feed rollers (3) by moving the cloth from side to side. Rotate the rollers forward with your finger and repeat the previous step until the rollers are clean. Wipe the three back rollers (1) by moving the cloth from side to side. Then rotate them forward with your fingertips and rewipe them. Repeat this process until they are fully clean. Turn the wheel (1) to rotate the two front rollers (2)as you wipe them, until they are clean. Close the ADF inner cover and top cover. [. . . ] Do not use any organic solvents, or acidic or alkaline solutions. Be careful not to stress or damage the touch screen display. Use a soft cloth or slightly moistened with water, a neutral detergent or ethanol to gently clean the touch screen. Never use solvents or strong detergents on the cabinet: they could cause damage. [. . . ]