User manual KYOSHO SONIC SPORTS 1300

[. . . ] Secure nylon hinges with instant glue, being careful not to glue the wing and aileron together. B Align the center line of main wing with aileron. [. . . ] @ Adjust the travel of each control surface to the values in the diagrams. For the correct placement of decals, please refer to box top. *This aircraft has been flight tested with snap-rolls and other aerobatic maneuvers. However, repeated violent maneuvers may overstress the airframe. Please fly in a way that will not otherstress the airframe. *Repeated flyng can cause stress cracks to appear in the wood and joints, please inspect after each flight. If any abnormalities are noted, repair immediately befor the next flight to avoid accsidents. *Glue joints can loosen even thoogh they appear to be tight. If you notice irregular flight, investigate the cause and repair it befor the next flight. *Even though the kit's supplied with fitted linkages, inprpely assembling then can result in binding or loose control surfaces. this can cause flutter and aircraft control problems. Make suer all linkages are tight and control surfases move properly before flying. [. . . ] B By moving the throttle control, check that the engine carburetor easily opens and closes. For starting the engine, apply low throttle and hold the engine starter against the spinner. [. . . ]