User manual KYOSHO V-ONE EXPLODED VIEW

[. . . ] All rights reserved. BN68-04065A-02 For more information on how to view the e-Manual (p. 39) Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice. User Instructions · Screen Image retention Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes as it can cause screen image retention. This image retention is also known as "screen burn". [. . . ] Control the TV using your hands. Note that the Motion control function closes if your hands go out of the camera range. While using the Motion control, if you use the other devices (i. e. remote control, keyboard, etc. ), Motion control closes. English - 22 Controlling the TV with your hands using motions Access Motion control - Action: Spread your hand in the direction of the camera, and shake it three or four times from a side to side. Pointing Navigation Moves the cursor to the position you want. - Action: Spread your hand and guide the cursor to position you want. Run Selects an item or executes a command that is indicated by the cursor or is highlighted. - Action: Clench your fist. When you watch some page or some image, you can move the page or image to direction you want if it can be moved. In this case, use and keep the Run motion, and then move it to direction you want. To move a page, clench your fist, keep it clenched, and then move it in the direction you want the page to move. Return Return to the previous menu. - Action: Spread your hand and rotate it counterclockwise. If the TV fails to recognize your face, try again. 4. The TV logs you into your Samsung account automatically. If the TV recognizes two or more registered faces, the Samsung account list appears. Select your account to log in. If your face is unregistered, you can register your face in your Samsung account. Follow steps 4 through 5 in the "To register your face to your Samsung account:" procedure above. Account" (Advanced Features Smart Hub) in the e-Manual. If you have no account, you can create one. For more detailed information, refer to "Creating an English - 25 Evolution Kit slot (Sold Separately) This socket is designed to accept an extension device called the Evolution Kit that enables the TV to run a variety of the latest applications for a better user experience. The Evolution Kit, which may not be available depending on the product, will be sold separately in 2013 or later. English - 26 Network Connection You can set up your TV so that it can access the SMART TV applications through your local area network (LAN) using a wired or wireless connection. After you have "physically" connected your TV to your network, you must configure the network connection to complete the process. You can configure the connection during the Initial Setup process (see page 10) or after the Initial Setup process, through the TV's menu. Network Connection - Wireless You can connect your TV to your LAN through a standard wireless router or modem. Wireless IP Sharer (router having DHCP Server) The LAN Port on the Wall LAN Cable (Not Supplied) This TV supports the IEEE 802. 11a/b/g and n communication protocols. When you play video over a network connection, the video may not play smoothly. Most wireless network systems incorporate a security system that requires devices that access the network through an access point or AP (typically a wireless IP Sharer - router or modem) to transmit an encrypted security code called an access key. Your TV is compatible with the following security protocols: · Authentication Mode: OPEN, SHARED, WPAPSK, WPA2PSK · Encryption Type: WEP, TKIP, AES If you select Pure High-throughput (Greenfield) 802. 11n mode and the Encryption type is set to WEP or TKIP on your AP or wireless router, Samsung TVs will not support a connection in compliance with new Wi-Fi certification specifications. English - 27 Configuring a Wireless Network Connection The instructions below are for networks that use the Dynamic Host Configuration Protocol (DHCP) to configure network connections automatically. [. . . ] 41 M Menu Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Motion Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Motion Control Environment Test . . . . . . . . . . . . . . . . . . . . . . 22 Motion Guide Bar Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]