User manual KYOSHO V-ONE S3 EVO EXPLODED VIEW

[. . . ] ⷠThe thermal head can get quite hot when it has been printing. Do not touch the thermal head until it has had a chance to cool off. Use only a damp cloth; do not use liquid or aerosol cleaners. If you put it on something unsteady, it may fall and be damaged. [. . . ] Ensure that you have a suitable power supply before connecting the product. If in doubt contact your dealer or check with your local power provider. Ensure both the product and mains power switches are in the OFF position before connecting the AC power cable. Do not connect or disconnect the power plug with a wet hand as this may cause electric shock. Always hold the power plug to connect/disconnect the power cable to/from the mains socket. Unplugging by pulling on the cable can cause fraying and may lead to fire or electric shock. This product has an earthed plug as a safety feature and will only connect to an earthed socket. Do not attempt to defeat the earthing or there is a risk of fire or shock. If using an extension cable or power strip ensure that the total current rating (amperes) of all connected equipment is less than the maximum rating of the extension cable, power strip or wall outlet. If the product is already supplied with a fitted power strip then no additional power strip or extension cable should be used to connect to the mains wall outlet. Ensure the power cable is routed so as not to be damaged or cause a trip hazard. There is a risk of explosion if the battery is replaced by an incorrect type. The product battery should not require replacement during the life of the product. Do not throw toner cartridges or image drum cartridges into a fire as you may receive burns from a dust explosion. After installing additional memory, hard disk drive, or any other internally fitted option, any covers removed or doors opened must be closed or replaced and secured to prevent risk of fire. The acoustic noise of this product is less than 70 dB (A) as measured in accordance with EN ISO 7779. The operating condition range for your product is: 10 to 32°C and 20 to 80% RH. Operation of the product outside this range could result in damage to the product. Is fitted, exercise care when moving these items so as to avoid risk of entrapment or personal injury. If the product is installed on a cabinet or high capacity feeder, ensure wheel locks are applied once placed in final position for use, to prevent risk of movement or injury. (Oki Data) warrants this Product Name (hereinafter "the Product") to be free from defects in material and workmanship and will remedy any such defect according to, the terms of this Limited Warranty. Oki Data will repair or at its option, replace, with the same or its functional equivalent, at no charge, any defective component(s) of the Product for two (2) years from the date of purchase. [. . . ] iN NO EVENT SHALL KYOSHO DATA OR ITS AFFILIATES BE LIABLE TO A PURCHASER OR ANY OTHER PERSON FOR SPECIAL , COLLATERAL , PUNITIVE , INCIDENTAL OR CONSEQUENTIAL DAMAGES INCLUDING LOST PROFITS , BUSINESS REVENUE , GOODWILL OR ANTICIPATED SAVINGS IN CONNECTION WITH OR ARISING OUT OF THE PURCHASE OR USE OF THE KYOSHO DATA PRODUCT , WHETHER ARISING IN CONTRACT OR IN TORT , WHETHER OR NOT CUSTOMER SHALL HAVE INFORMED KYOSHO DATA OF THE POSSIBILITY OR LIKELIHOOD OF ANY SUCH DAMAGES. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion may not apply to you. This Limited Warranty applies to this Product. However, the procedure for obtaining service may vary outside the continental United States. [. . . ]