User manual KYOSHO VEILSIDE S2000 MILLENNIUM

[. . . ] All rights reserved. BN68-04080A-01 For more information on how to view the e-Manual (p. 19) Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice. User Instructions · Screen Image retention Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes as it can cause screen image retention. This image retention is also known as "screen burn". [. . . ] If You Want to Turn the Store Demo Mode On or Off. To set or unset Store Demo mode outside of Setup, press and release the Controller when the power is on. Push the Controller to the left (to MENU (m)) and hold for more than 5 seconds. To cancel Store Demo, bring up the Function menu using the Controller, push the Controller to the right (to Source (s)) and hold for more than 5 seconds. The default PIN number is "0-0-0-0". If you want to change the PIN number, use the Change PIN function. You should do Setup (Menu System) again at home although you did in shop. If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to "0-0-0-0": MUTE 8 2 4 POWER (on). English - 10 Connecting to an AV Device Using an HDMI Cable: HD connection (up to 1080p) We recommend using the HDMI connection for the best quality HD picture. Available devices: DVD player, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver. Device HDMI Cable (Not Supplied) HDMI OUT HDMI IN 1 (DVI), HDMI IN 2 (ARC), HDMI IN 3 · For better picture and audio quality, connect to a digital device using an HDMI cable. · An HDMI cable supports digital video and audio signals, and does not require an audio cable. - To connect the TV to a digital device that does not support HDMI output, use an HDMI/DVI and audio cables. · If you connect an external device to the TV that uses an older version of HDMI, the video and audio may not work. You can only choose external devices that are connected to the TV. In the displaying Source list, connected inputs will be highlighted. How to use Edit Name Edit Name lets you associate a device name to an input source. To access Edit Name, press the TOOLST button In Source. The following selections appear under Edit Name: VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Select an input jack, and then select the name of the device connected to that jack from the list that appears. For example, if you have your Blu-ray player attached to HDMI IN 2, select Blu-ray for that input. If you connect a PC to the HDMI IN 1 (DVI) port with an HDMI cable, assign PC to HDMI1/DVI in Edit Name. If you connect a PC to the HDMI IN 1 (DVI) port with an HDMI to DVI cable, assign DVI PC to HDMI1/DVI in Edit Name. If you connect a AV device to the HDMI IN 1 (DVI) port with an HDMI to DVI cable, assign DVI Devices to HDMI1/DVI in Edit Name. Information You can see detailed information about the selected external device. Refresh If the external devices are not displayed in the Source list, open the Tools menu, and then select Refresh. The list will display all connected devices. Alternatively, you can refresh the Source list by selecting a using your remote. English - 15 Network Connection You can set up your TV so that it can access the SMART TV applications through your local area network (LAN) using a wired or wireless connection. After you have "physically" connected your TV to your network, you must configure the network connection to complete the process. You can configure the connection during the Initial Setup process (see page 7) or after the Initial Setup process, through the TV's menu. Network Connection - Wireless You can connect your TV to your LAN through a standard wireless router or modem. Wireless IP Sharer (router having DHCP Server) The LAN Port on the Wall LAN Cable (Not Supplied) This TV supports the IEEE 802. 11a/b/g and n communication protocols. When you play video over a network connection, the video may not play smoothly. [. . . ] Remove the screws from the back centre of the TV, put the screws into the clamps, and then fasten the screws onto the TV again. Screws may not be supplied with the product. In this case, Screw Specifications · For a 43 ~ 64 inch: M8 please purchase the screws of the following specifications. Wall 3. Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong cable and then tie the string tightly. NOTE · Install the TV near to the wall so that it does not fall backwards. · It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the TV. [. . . ]