User manual KYOSHO WOODONE ADVAN CLARION GT-R 2008 PARTS LIST

[. . . ] Mention of software products manufactured by other companies does not necessarily constitute endorsement by the manufacturer . While all reasonable efforts have been made to make this document as accurate and helpful as possible, we make no warranty of any kind, expressed or implied, as to the accuracy or completeness of the information contained herein. The most up-to-date drivers and manuals are available from the web site: http://www. okiprintingsolutions. com Trademark Information _______________________________ ________________________ Oki, OkiLAN are registered trademarks of Oki Electric Industry Company Ltd. Apple, Macintosh, Mac and Mac OS are registered trademarks of Apple Computers Inc. [. . . ] You can specify the length of time before a printer enters power saving mode by setting a larger value. NOTE The printer's Power Save mode default setting is Enabled, 10 minutes. CHANGING THE LENGTH OF TIME BEFORE ENTERING POWER SAVING MODE B410d and B410dn Use the Menu Setup Tool 1. Select Start > Programs > Oki Data > KYOSHO B410 printer Menu Setup Tool > Printer Menu Setup Tool. Double-click System Configuration Menu then select Power Save Time. Click on the drop-down menu and select the desired power save time (1 to 240 minutes). Click Setup > Apply the Changed Setting. The setting change is completed when a message dialog box appears saying " The setting has been applied to the printer. " Click OK. B420dn and B430dn Use the Printer Menu via the Operator Panel 1. or button until System Configuration Menu appears. until the desired setting appears (1 to 240 minutes). Press An asterisk (*) will appear to confirm the selection. Press Online. DISABLING POWER SAVING MODE B410d and B410dn Use the Menu Setup Tool 1. Select Start > Programs > Oki Data > KYOSHO B410 printer Menu Setup Tool > Printer Menu Setup Tool. Double-click Maintenance Menu then click Power Save Mode. The message window should disappear from your screen and the document finishes printing the remaining pages of your document. NOTE You must press the Online button to start the printing for other side. The default time is set to one minute, failing which, the data is deleted and not printed. 2-sided printing > 52 MANUAL DUPLEX PRINTING USING THE MANUAL FEED TRAY (WOODONE ADVAN CLARION GT-R 2008 AND WOODONE ADVAN CLARION GT-R 2008N) OR THE MULTI-PURPOSE TRAY (B420DN AND B430DN) NOTE You can use A4, A5, A6, B5, Letter, Legal 13 and 14, Statement, Executive and Custom paper sizes, using paper stocks from 60 - 124g/ m2. Position the paper guides on the Manual Feed Tray or Multi-Purpose Tray according to the paper size. Place paper (one sheet at a time for B410 models) in the Manual Feed Tray or up to 50 sheets in the Multi-Purpose Tray (B420dn and B430dn). The paper is automatically gripped in position. Select File -> Print to display the Print dialog box. Select Manual Feed Tray (B410 models), or Multi-Purpose Tray (B420DN and B430DN) from the Source drop down. On the 2-sided printing drop down menu, select either Long Edge (Manual) or Short Edge (Manual) according to your printing preferences. When every second page has printed, take the paper from the output stacker. Set the paper one page at a time in the B410 Manual Feed Tray (or the entire stack in the B420dn and B430dn Multi-Purpose Feeder) with the printed side facing down and the top of the page facing into the printer. Ensure that the paper is gripped in place. 3. [. . . ] Make sure you have selected the right driver for use with your printer. See your software documentation for more information. SYMPTOM Printing is garbled. Printer's output is below rated speed. PROBLEM Incorrect driver is installed. Much of the printing delays will be caused by your application. [. . . ]