User manual LA CROSS TECHNOLOGY STX7000

[. . . ] To change the setting mode for time and date, press the PUSHPIECE and the RECESSED BUTTON simultaneously for about 4 seconds. The seconds will flash in the LCD display. 6 2. Press and release the PUSH-PIECE. The seconds will be set to zero (00). 3. 4. Press and release the PUSH-PIECE to set the minutes. [. . . ] Hold the PUSH-PIECE continuously to fast forward the minutes. By pressing and releasing the RECESSED BUTTON you can change the setting menu in the following order: a. The display of the date without the possibility to adjust it As soon as the WWVB signal can be received again, the watch will automatically adjust to the correct time. BEGIN WWVB SIGNAL SEARCH MANUALLY *If the WWVB reception is disturbed, you can start the WWVB signal search manually. Press and hold the PUSH-PIECE for about 4 seconds. The hands will advance to the 12:00 position. "SET" and "12" will then flash alternately in the LCD. If the hands do not move exactly to the 12:00 position, you will have to manually adjust the hands. (See "Adjusting the Hands") 8 2. Place the watch on a steady surface for better reception. Prior to WWVB reception (and 15 seconds after holding the PUSHPIECE) the hands will automatically return to the manually set time. All replaced parts and products become the property of La Crosse Technology, Ltd and must be returned to La Crosse Technology, Ltd. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer. La Crosse Technology, Ltd will pay all expenses for labor and materials for all repairs covered by this 14 warranty. If necessary repairs are not covered by this warranty, or if a product is examined which is not in need or repair, you will be charged for the repairs or examination. The owner must pay any shipping charges incurred in getting your La Crosse Technology, Ltd product to a La Crosse Technology, Ltd authorized service center. La Crosse Technology, Ltd will pay ground return shipping charges to the owner of the product to a USA address only. Your La Crosse Technology, Ltd warranty covers all defects in material and workmanship with the following specified exceptions: (1) damage caused by accident, unreasonable use or neglect (including the lack of reasonable and necessary maintenance); (2) damage occurring during shipment (claims must be presented to the carrier); (3) damage to, or deterioration of, any accessory or decorative surface; (4) damage resulting from failure to follow instructions 15 contained in your owner's manual; (5) damage resulting from the performance of repairs or alterations by someone other than an authorized La Crosse Technology, Ltd authorized service center; (6) units used for other than home use (7) applications and uses that this product was not intended or (8) the products inability to receive a signal due to any source of interference. This warranty covers only actual defects within the product itself, and does not cover the cost of installation or removal from a fixed installation, normal set-up or adjustments, claims based on misrepresentation by the seller or performance variations resulting from installation-related circumstances. LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE OPERATION OR 16 MALFUNCTION OF THIS PRODUCT. [. . . ] This warranty covers only actual defects within the product itself, and does not cover the cost of installation or removal from a fixed installation, normal set-up or adjustments, claims based on misrepresentation by the seller or performance variations resulting from installation-related circumstances. LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE OPERATION OR 16 MALFUNCTION OF THIS PRODUCT. THIS PRODUCT IS NOT TO BE USED FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMATION. This warranty gives you specific legal rights. [. . . ]