User manual LA CROSS TECHNOLOGY WS-1025 QUICK START GUIDE

[. . . ] Failure to do so may result in bad adhesion between the window and holder. Remove the holder that has the adhesive tape attached (this is held on by a pressure fitting and can simply be pulled off). Using a screwdriver open the battery compartment. Remove the plastic tab from between the battery and the positive terminal. [. . . ] Press and release the MODE button to confirm the hour and advance to the minute setting. The minutes digits will flash at the bottom of the display. Press and release the + button to advance the minute. Holding down the + button will advance the minutes faster. Press and release the MODE button to confirm the minutes and exit the time setting mode. NOTE: The thermometer does not have an automatic time out feature and will stay in the time set mode until manually completed. Using MIN/MAX Temperatures · · · · · · The upper display shows the maximum temperature. The middle display shows the current temperature. The lower display shows the minimum temperature. The minimum temperature automatically resets at 8:00 P. M. The maximum temperature automatically resets at 8:00 A. M. If the time is not set the minimum and maximum temperatures will not be reset at the correct local time. Maintenance · · · Replace the battery when the display becomes weak. Do not expose the instrument to extreme temperatures, vibration or shock Clean the thermometer with a soft damp cloth only. Do not use solvents or scouring agents. 1 · Please do not try to repair the unit. Contact the original point of purchase or La Crosse Technology Warranty for repair/replacement instructions. Warranty Information La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this product. To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem determination and service procedures. Warranty service can only be performed by a La Crosse Technology, Ltd authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to La Crosse Technology, Ltd or La Crosse Technology, Ltd's authorized service center. La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of La Crosse Technology, Ltd and must be returned to La Crosse Technology, Ltd. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer. [. . . ] La Crosse, WI 54601 Phone: 608. 782. 1982 Fax: 608. 796. 1020 e-mail: support@lacrossetechnology. com (warranty work) sales@lacrossetechnology. com (information on other products) web: www. lacrossetechnology. com All rights reserved. This handbook must not be reproduced in any form, even in excerpts, or duplicated or processed using electronic, mechanical or chemical procedures without written permission of the publisher. This handbook may contain mistakes and printing errors. The information in this handbook is regularly checked and corrections made in the next issue. [. . . ]