User manual LA CROSS TECHNOLOGY WS-2510

[. . . ] Touch Screen Wireless Weather Station WS-2510 Operating instructions Contents 1. General information and functioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5 Quick overview of the display fields on the main display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4 Weather station connection panel, mounting arrangements and battery compartment . . . . . . . . . . . . 5 2. [. . . ] Setting the day and the date The date and the day of the week are displayed in touch screen field 21. - Touch screen field 21 must be pressed in order to make the required settings. - The date display will now flash: German (24 h): or English (12 h). and the lower touch screen field will change to the following form: - - The date can now be set using the touch screen fields "+" and "­". It is possible to run through the display more quickly by pressing for longer. The day of the week can also be selected using touch screen field 27 (DAY) as long as the date is flashing. In addition, it now possible to select the display format for the time, date and day of the week between military and standard format using the "12/24h" touch screen field. Please note: The whole of the display changes each time, i. e. the time, date format and language for the day of the week display. When all the settings have been made, you can exit set-up by pressing the "END" key. Sensor administration Sensor administration is called up by pressing the "SENSOR ADMIN" touch screen field: 4 1 2 3 Here you can set the following parameters: - Address for the rain (1), wind (2) and brightness sensors (3) if deviating from address 7. If an address is changed here, after leaving the configuration mode, the weather station will carry out a complete sensor synchronization for 6 minutes (as at 7:30 in the morning). 1. Sensor addresses The sensor addresses can be set up by touching the associated field (0 to 7). 2. Protocol version The sensor protocol version can be changed over between 1. 1 and 1. 2 by touching the "Version" field (field 1)(for an explanation see section on Commissioning, page 6). 14 3. 2. Normal display function The diagram below shows an example of the normal weather station display. In the following description of the individual display fields, the meaning of the display is always explained first and in some cases the necessary operating actions followed by any available key functions so that you can get a quick overview of the display and control options for each value. 3. 2. 1. Temperature/Humidity/Climatic conditions 3. 2. 1. 1. Indoor sensor (field 1/2) 3 1 2 4 5 6 2 1 4 6 The top left hand field of the display is associated with the indoor sensor. It displays the following information from left to right: 1. Tendency arrow symbols Indication of the tendency of the indoor temperature compared with the last value received: rising (arrow pointing upwards) or falling (arrow pointing downwards). Alternative display of the current temperature (see example left) or corresponding dewpoint ("Dewpoint", see example right). Here, the "Graph" symbol shows that the trend display for the indoor temperature has been selected in the history field. It only appears if it has previously been selected (see 3. 2. 6. :"History "). The trend can also be displayed for the humidity. Depending on selection in configuration mode. [. . . ] La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of La Crosse Technology, Ltd and must be returned to La Crosse Technology, Ltd. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer. La Crosse Technology, Ltd will pay all expenses for labor and materials for all repairs covered by this warranty. [. . . ]