User manual LA CROSS TECHNOLOGY WS-6118

[. . . ] WS-6118 ATOMIC CLOCK WITH OUTDOOR WIRELESS TEMPERATURE AND MOON PHASE Instruction Manual FEATURES: ATOMIC CLOCK: Hanging holes OUTDOOR TEMPERATURE TRANSMITTER: Holder LCD1 display LCD2 display · Remote transmission of outdoor temperature to the atomic clock by 433 MHz signals · Wall mounting case Function keys TO INSTALL AND REPLACE BATTERIES IN THE ATOMIC CLOCK Foldable stand · · · · · · · · · · · · · Battery cover WWVB Radio controlled time with manual time setting 12/24 hour time display Time display: hour, minute, second Alarm setting with snooze function Calendar display Weekday display (3 languages to choose from: English, French and Spanish) Time zone setting Daylight savings time ON/OFF option (DST) ºC or ºF temperature display selectable Indoor temperature display Outdoor temperature display via 433MHz transmission Wall mount or freestanding Current moon phase display The atomic clock uses 2 x AA, 1. 5V batteries. To install and replace the batteries, please follow the steps below: 1. Insert finger or other solid object in the space at the bottom center of the battery compartment and lift up to remove the cover. Insert batteries observing the correct polarity (see marking inside battery compartment). [. . . ] To return to the normal display mode from anywhere in manual setting mode simply press the SNZ key anytime. 12/24 HOURS TIME DISPLAY SETTING The alarm will be automatically ON when the alarm time is set. To deactivate the alarm (OFF), press and release once the ALM key in normal mode display. The alarm icon will disappear, the alarm is now off SNOOZE SETTING The snooze can only be activated during alarm time for a snooze duration of 10 minutes by pressing the SNZ key on the back of the clock °C OR °F TEMPERATURE SETTING OUTDOOR TEMPERATURE TRANSMITTER: The temperature is measured and transmitted to the atomic clock every 1 minute. The atomic clock will update the temperature display every 5 minutes. The range of the outdoor temperature transmitter may be affected by the temperature. At cold temperatures the transmitting distance may be decreased. Please bear this in mind when positioning the transmitter. Also the batteries may be reduced in power during periods of extreme cold temperatures. EXIT THE MANUAL SETTING MODES · 433MHz RECEPTION CHECK FOR OUTDOOR TEMPERATURE TRANSMITTER The atomic clock will receive the temperature data within 4 minutes. If the temperature data is not being received 4 minutes after setting up (the display shows "- - -"), then please check the following points: 1. The distance of the atomic clock or outdoor temperature transmitter should be at least 6 feet (2 meters) away from any interfering sources such as computer monitors or TV sets. Avoid placing the receiver onto or in the immediate proximity of metal window frames. Using other electrical products such as headphones or speakers operating on the same signal frequency (433MHz) may prevent correct signal transmission and reception. Neighbors using electrical devices operating on the 433MHz signal frequency can also cause interference. Note: When the 433 MHz signal is received correctly, do not re-open the battery cover of either the outdoor temperature transmitter or atomic clock, as the batteries may spring free from the contacts and force a false reset. Should this happen accidentally then reset all units (see Setting up above) otherwise transmission problems may occur. The maximum transmission range is 82 feet (25 meters) from the outdoor temperature transmitter to the atomic clock (in open space). However, this depends on the surrounding environment and interference levels. If no reception is possible despite the observation of these factors, all system units have to be reset (see Setting up). WWVB RADIO CONTROLLED TIME The NIST radio station, WWVB, is located in Ft. The month&date/weekday/indoor temperature/outdoor temperature is the default. The display should now show the month&date/weekday/seconds/ indoor temperature. Press the + key a second time and the display will now show the month&date/seconds/indoor temperature/outdoor temperature. Press the + key third time and the display will return to the normal display. MOON PHASE The Moon Phases, and their corresponding dates appear in LCD 2. [. . . ] Contact La Crosse Technology immediately upon discovery of any defects covered by this warranty. Before sending the atomic clock in for repairs, contact La Crosse Technology. The atomic clock will be repaired or replaced with the same or similar model. This warranty does not cover any defects resulting from improper use, unauthorized repairs, faulty batteries, or the clocks inability to receive a signal due to any source of interference. [. . . ]