User manual LA CROSS TECHNOLOGY WS-7015

[. . . ] Operation Manual Professional Remote Weather Station WS-7015 1. Introduction Dear Customer, We want to thank you for purchasing this Professional Remote Weather Station. Its design and construction corresponds to all United States requirements with regard to electro magnetic compatibility. The unit carries the FCC sign, its conformity has been proven, the respective depositions and documents are deposited with the manufacturer. In order to maintain this condition and ensure safe operation the user must observe this operation manual! [. . . ] Since all relevant data is simultaneously displayed in the first place, operation will essentially be limited to simple selection of further sensors or further weather data by repeated pressing of the respective function keys. Item "Operation" solely pertains to operation in Normal Mode with the large key imprints being applicable. Programmable functions are thoroughly covered in Item "Programming Mode" with the small key imprints being applicable. Indoor In normal operating mode the indoor display in the upper left of the LCD displays the temperature and humidity at the location of the Indoor Sensor. By once pressing the "Indoor" key the Dew Point will be displayed. The Dew Point is that point in temperature at which condensation of humidity begins and the so called "Dewing" takes place, i. e. the humidity is condensing and will precipitate in liquid form. air with a water-vapour content of 17. 4 g/m lies at a temperature of 68ºF (20°C). If the dew point for water-vapor drops below 32ºF (0°C), the precipitation will take place as snow or hard-frost. The dew point depends upon the concurrence of a certain air pressure, temperature and humidity at the same time. One more pressing of the "Indoor" key will lead back to the normal temperature display. Wind Pressing of the "Wind" key leads to the Change of Units for the Display of Wind Strength respectively and the change from the display of the wind strength to a Digital Display of Wind Direction in 5° steps within the compass (digital display field). The order of changes and displays will be as follows: Wind Strength in mph Wind Strength in knots Wind Strength in m/s Wind Strength in km/h Wind Strength in Beaufort Display of Wind Direction in place of Wind Strength Note!Unlike the real display the following illustration shows every display combination possible in order to give a description of their appearance. 1. 2. 3. 4. 23. Temperature Indoor Sensor and Indoor/Outdoor Sensor 2 5 4 respectively in degree Fahenreit or Celsius Current Indoor Measurement: Temperature or Perceived 1 Temperature or Dew Point 8 Humidity Indoor Sensor and 6 Indoor/Outdoor Sensor 3 7 respectively 14 Temperature of selected 16 Temperature/Humidity Sensor 15 Current Outdoor Measurement: 18 Temperature or Perceived 17 Temperature or Dew Point 13 12 Identification Number of selected 9 11 Outdoor Sensor 10 Humidity of selected Outdoor Sensor Low Battery Indicator 22 21 Display of Air Pressure 23 Display of Air Pressure Unit: inHg or hPa Display of Rain Volume Unit: 20 19 in or mm Display of Rain Volume Display of Time Period of Rain Volume: Total or last 24 Hours or last Hour Display of Air Pressure Tendency Display of Air Pressure History of last 24 Hours Icons for Weather Forecast Display for Poll of Minimum Values Display for Poll of Maximum Values Display of Date of the Day Display of Time Display of Wind Strength Unity: mph, Knots or km/h or m/s or Beaufort Display of Wind Strength or Wind Direction (in 5° Steps) Compass, Display in 22. 5° Steps with Display of Deviation Range at Changing Winds During simultaneous display of all minimum or maximum values there will for the present be no additional display of time and date. There will also be no weather symbols, no display of air pressure tendency and no air pressure history. Instead there will be the respective display MIN or MAX in the right center of the LCD. If the clock not been manually set, then there will be no storage of any minimum or maximum values. Display of Single Values with their respective Time and Date If during display of the minimum or maximum values one of the Arrow keys () or () is pressed, nothing but the minumum or maximum value of the indoor temperature with its respective assigned time and date will be diplayed. Display of Wind Strength in the Digital Display Field Display of Wind Direction in the Digital Display Field Now by use of the Arrow keys and the Min/Max key each single minimum or maximum value with its assigned time and date of storage can be selected. Additionally with the maximum wind strength the wind direction at the time of storage will be displayed. During this display mode all other sections of the LCD will stay invisible. Selective Reset of Stored Values If during display of any selected minimum or maximum values the "Reset" key is pressed for appr. [. . . ] This may bear the danger of water entering the unit's electronic parts. Do not immerse the Base Station in water. Please do not attempt any repairs on your own. It is recommended to have repairs only performed by trained personnel at the point of purchase. [. . . ]