User manual LA CROSS TECHNOLOGY WS-7078-UF

[. . . ] WS-7078UF Wireless 433 MHz Radio-controlled Weather Station Instruction Manual TABLE OF CONTENTS Topic Inventory of Contents/Additional Equipment About WWVB Quick Set-Up Guide Detailed Set-Up Guide Battery Installation Program Mode Function Keys 12/24 hour Time Setting Time Zone Setting Daylight Saving Time Setting Time Setting (WWVB & Manual) Setting Day, Date, and Year Selecting °F or °C Setting the LCD Contrast Features Weather Forecast Icons Indoor Temperature, Humidity, & Comfort Level Indicator Outdoor Temperature & Humidity Minimum & Maximum Records (Indoor, Outdoor, & Resetting) Alarm (Setting, Snoozing, & Stopping) Additional Remote Thermo/hygro Sensors (Set-Up, Viewing, & Operation) Mounting Troubleshooting Maintenance & Care Specifications Warranty Information 2 Page 3 4 5 6 7 8 8-9 9 10-11 11-12 12 12 13-14 15 15 15-16 17-18 18-19 20-21 22 23 24 25-26 INVENTORY OF CONTENTS 1. One TX4U remote thermo/hygro sensor with mounting bracket (Figure 2). Three each, ½" Philips screws. Instruction manual and warranty card. Figure 1 Time LCD Date LCD Forecast LCD Indoor LCD Outdoor LCD Figure 2 ADDITIONAL EQUIPMENT (not included) 1. [. . . ] (This feature is explained in further detail in section VI--Adding Remote Thermo/hygro Sensors). Minimum and Maximum Temperature Records The WS-7078UF keeps a record of the MINIMUM and MAXIMUM temperature and the time and date of their occurrence, for both the indoor and outdoor modes. Viewing the Indoor Temperature Records Note: Waiting 20 seconds during either the minimum or the maximum readings will automatically return the indoor weather station to the current temperature and humidity readings 1. Press and release the "IN" button once. "MIN" will appear in the upper-center location of the flashing INDOOR LCD indicating that the minimum temperature (along with the humidity measured at that time) and the time and date of occurrence are displayed. The minimum records will display for 20 seconds. Press and release the "IN" button again (once while "MIN" is still displayed, twice otherwise). "MAX" will appear in the upper-center location of the flashing INDOOR LCD, indicating that the maximum 3. 4. 15 5. temperature (along with the humidity measured at that time) and the time and date of occurrence are displayed. The maximum records will display for 20 seconds. While "MAX" is still displayed press and release the "IN" button again to return to the current data display. Viewing the Outdoor Temperature Records Note: Waiting 20 seconds during either the minimum or the maximum readings will automatically return the indoor weather station to the current temperature and humidity readings. Press and release the "OUT" button once. "MIN" appears in the upper-center location of the flashing OUTDOOR LCD, indicating that the minimum temperature, and the time and date of occurrence are displayed. The minimum records will display for 20 seconds. Press and release the "OUT" button again (once while "MIN" is still displayed, twice otherwise). "MAX" appears in the upper-center location of the flashing OUTDOOR LCD indicating that the maximum temperature and the time and date of occurrence are displayed. While "MAX" is still displayed press and release the "OUT" button again to return to the current data display. 3. Resetting the Minimum and Maximum Records 1. All the indoor records (minimum and maximum) will be reset after the "IN" button is pressed and held for 5 seconds. All the outdoor records (minimum and maximum) will be reset after the "OUT" button is pressed and held for 5 seconds. 2. V. Setting the Alarm (Alarms 1 and 2) Note: There are two alarms that can be set. [. . . ] 1. 56 x 0. 78 x 4. 29 inches (40 x 20 x 110 mm). 24 WARRANTY INFORMATION La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this product. To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem determination and service procedures. Warranty service can only be performed by a La Crosse Technology, Ltd authorized service center. [. . . ]