User manual LA CROSS TECHNOLOGY WS-7394U-IT_E

[. . . ] WS-7394U-IT Wireless 915 MHz Wireless Weather Station Instruction Manual TABLE OF CONTENTS Topic Inventory of Contents/ Additional Equipment About WWVB Quick Set Up Guide Detailed Set Up Guide Battery Installation Start Up Sequence Explanation of LCD Information Function Key Layout Program Mode Overview of Programming Sequence LCD Contrast Setting Time Zone Setting DST ON/OFF Setting Radio-controlled Time ON/OFF Setting 12/24-hour Time Mode Setting Setting the Time/Date Manually Temperature Measuring Units (ºF/ºC) Air Pressure Measuring Units (inHg/hPa) Relative Pressure Setting Forecast Sensitivity Setting Features and Operation Minimum/Maximum Temperature/Humidity Multiple Remote Temperature/Humidity Sensors Comfort Icon Weather Forecast and Pressure Trend Indicators Weather Icons Weather Tendency Arrows Barometric Air Pressure Reading Air Pressure History Bar Chart Mounting Maintenance and Care Troubleshooting Guide Specifications Warranty Information Page 3 3 4 5 6 7 8 8 8 9 9 9-10 10 10-11 12 12 12 13 14 15-16 16 16 16-17 17 17 17-18 19-20 20 21 22 23-24 2 This product offers: INSTANT TRANSMISSION is the stateof-the-art new wireless transmission technology, exclusively designed and developed by LA CROSSE TECHNOLOGY. INSTANT TRANSMISSION offers you an immediate update (every 4 seconds!) of all your outdoor data measured from the sensors: follow your climatic variations in real-time! INVENTORY OF CONTENTS 1. WS-7394U-IT-- Wireless Weather Station (Figure 1) 2. TX29U-IT--remote temperature sensor (figure 2) 3. [. . . ] To achieve a true temperature reading, avoid mounting the remote temperature sensor (or any sensor) where direct sunlight can reach the remote sensor. We recommend that you mount the remote sensor on a North-facing wall or under an eve. The sending range of the remote temperature sensor is 330-ft (100m) however obstacles such as walls, concrete, and large metal objects can reduce the range. Place all units in their desired location, and wait approximately 15 minutes before permanently mounting to ensure that there is proper reception. If the Wireless Weather Station loses the signal from the remote sensor, it will display the last temperature reading for 15 minutes. After 15 minutes of not receiving any signals, the remote temperature will display "- . -". Mounting the Remote Temperature Sensor The remote temperature sensor can be mounted in two ways: · with the use of screws · using the adhesive tape 1. Remove the mounting bracket from the remote temperature sensor. Place the mounting bracket over the desired location. Through the three screw holes of the bracket, mark the mounting surface with a pencil. Screw mounting bracket onto the mounting surface. Ensure that the screws are flush with the bracket. Insert the remote temperature sensor into the bracket. MOUNTING WITH ADHESIVE TAPE 18 a. b. e. With a nonabrasive solution, clean and dry the back of the mounting bracket and the mounting surface to ensure a secure hold. The mounting surface should be smooth and flat. Remove the protective strip from one side of the tape. Adhere the tape to the designated area on the back of the mounting bracket. Remove the protective strip from the other side of the tape. Position the remote temperature sensor in the desired location, ensuring that the Wireless Weather Station can receive the signal. Note: Mounting with adhesive tape is not recommended as a permanent mounting solution. Only use the adhesive tape during set-up process. B. Mounting the WS-7394U-IT Wireless Weather Station The Wireless Weather Station can be mounted in two ways: · with the table stand · on the wall with the use of a wall hanging screw (not included) 1. USING THE TABLE STAND The indoor weather station comes with the table stand already mounted. [. . . ] This warranty covers only actual defects within the product itself, and does not cover the cost of installation or removal from a fixed installation, normal setup or adjustments, claims based on 24 misrepresentation by the seller or performance variations resulting from installation-related circumstances. LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE OPERATION OR MALFUNCTION OF THIS PRODUCT. THIS PRODUCT IS NOT TO BE USED FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMATION. This warranty gives you specific legal rights. [. . . ]