User manual LA CROSS TECHNOLOGY WS-8015U

[. . . ] WS-8015U Wireless 433 MHz Weather Station with Sun/Moon Time Instruction Manual TABLE OF CONTENTS Topic Inventory of Contents/ Additional Equipment Quick Set Up Guide About WWVB Detailed Set Up Guide Battery Installation Start Up Sequence Explanation of LCD Information Function Key Layout Program Mode Time, 12/24 Hour Mode and Date Setting City Location Setting U. S. City Codes Canada City Codes Mexico City Codes Time Zone Setting Daylight Saving Time (DST) Setting Weather Measuring Units LCD Contrast Overview of Programming Sequence Features and Operation Sun Rise/Set and Moon Rise/Set Calculation Moon Phase MINIMUM/MAXIMUM TEMPERATURE/HUMIDITY MULTIPLE REMOTE SENSORS REMOTE TEMPERATURE ALARM COMFORT INDICATOR WEATHER FORECAST ICON AND PRESSURE TREND WEATHER TENDENCY ARROWS STORM WARNING ALARM TWO HOUR AIR PRESSURE TENDENCY CHART BAROMETRIC AIR PRESSURE READING AIR PRESSURE HISTORY BAR CHART MOUNTING MAINTENANCE AND CARE TROUBLESHOOTING GUIDE SPECIFICATIONS WARRANTY INFORMATION Page 3 4 4 5-6 5 6 7 7 8-13 8 8-9 9-11 12 12 12 12-13 13 13 14-20 14-15 15 15-16 16 16-17 17 17-18 18 19 19 19 19-20 21 23 23 24 25 2 INVENTORY OF CONTENTS 1. TX4U--remote thermo/hygro (temperature/humidity) sensor 3. Instruction manual and warranty card ADDITIONAL EQUIPMENT (not included) 1. [. . . ] The date is now flashing (the current date). Press and release the "+" or "­" key to select the date desired. Press and release the "SUN/MOON" key to calculate the new city location at the date selected. You may instead press the "SET" key to select a different location, starting at step b above. Once the "SUN/MOON" key is pressed, the sunrise/set and moonrise/set times will flash as dashes while the indoor weather station calculates the times (the moon phase is calculated, also). Once the times are displayed, the indoor weather station will remain in this mode for 30 seconds or until the "CH" key is pressed. The year, month, or date will also be flashing. At this time it is possible to start at step b. Once this mode is exited either through timeout after 30 seconds or by pressing the "CH" button, the indoor weather station will revert to the normal mode with the location and date set through the programming mode. The indoor weather station will default to the last city selected when this mode is entered again. u. 18 B. There are 12 moon phases shown on the indoor weather station; the black portion signifies the portion of the moon visible in the sky. Thus, when the moon icon is all black, it is a full moon. The indoor weather station is programmed with all moon phases from the year 2000 until 2099. 2. The moon phase for any date may be found by selecting a different date through the sun rise/set moon rise/set programming section (section A in Features and Operations). C. Minimum and Maximum Temperature and Humidity 1. Indoor Minimum and Maximum Temperature and Humidity The indoor weather station automatically stores the minimum and maximum indoor temperature and humidity. The minimum and maximum values are updated automatically when a new minimum or maximum is recorded, or until manually reset. From the normal display mode, press and release the "IN" key once to view the indoor minimum temperature and humidity ("MIN" will be displayed near the indoor temperature and humidity). Press and release the "IN" key again to view the indoor maximum temperature and humidity. Press and release the "IN" key again to return to the normal mode (timeout of viewing minimum/maximum values will occur if no keys are pressed for fifteen seconds). b. c. Note: To reset the indoor minimum and maximum temperature and humidity, press and hold the "IN" key for at least two seconds. 19 2. Outdoor Minimum and Maximum Temperature and Humidity The indoor weather station automatically stores the minimum and maximum outdoor temperature and humidity. The minimum and maximum values are updated automatically when a new minimum or maximum is recorded, or until manually reset. The outdoor (remote) minimum and maximum temperature values are displayed below the outdoor temperature display. [. . . ] You may also have other rights specific to your State. Some States do no allow the exclusion of consequential or incidental damages therefore the above exclusion of limitation may not apply to you. For warranty work, technical support, or information contact: La Crosse Technology 2809 Losey Blvd. La Crosse, WI 54601 Phone: 608. 782. 1610 Fax: 608. 796. 1020 e-mail: support@lacrossetechnology. com (warranty work) sales@lacrossetechnology. com (information on other products) web: www. lacrossetechnology. com FCC ID: OMO-01TX (sensor), OMO-01RX (receiver) THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. [. . . ]