User manual LA CROSS TECHNOLOGY WT-5442

[. . . ] QUICK SET-UP GUIDE 1) Insert two AA batteries into the remote transmitter. 2) Insert three AA batteries into the projection alarm and/or plug into wall. Note: When starting or restarting your projection alarm the remote transmitter must be started first and then your alarm. After power is supplied (either battery or AC) ensure that no buttons are pressed for 10 minutes. [. . . ] PROJECTION OF TIME AND/OR REMOTE TEMPERATURE 1. When plugged into an AC outlet, the projection alarm can continuously project the time and/or remote temperature. When operating on batteries alone, the Projection Alarm will only project when a button is pressed. The projection will auto-focus for display from three to six feet away. A dark surrounding will be necessary to clearly see the projection. The default is projecting time (Hour and Minutes). The Projection Alarm can be set to project the time (M0), remote temperature (M1), or alternating between time and remote temperature (M2) by pressing and releasing the "DISPL" button. The selected display mode will flash on the lower middle as "M0", "M1" or "M2". The direction of the display can also be rotated 360° in 90° increments by pressing the directional button. There is no display on the LCD that signifies the direction. The projector case can be rotated 180° to further help orient the projected display. Display Mode Light intensity Display Direction 7. The intensity of the projection can be adjusted to three different settings as well as turned "off" by pressing the light Intensity button. When turned off, the projection will only come on when a button is pressed. The intensity cannot be set for the projected display when set to "off". When only batteries are used, the intensity setting is set to "off" with no other options. 10 D. The projection alarm has an EL backlight designed for night viewing. This will light up for 2 seconds whenever a button is pressed. The EL backlight cannot be turned on constantly; this would drain the batteries and burn out the EL. The Projection Alarm measures indoor temperature with an internal sensor. This temperature is displayed in °F or °C, depending on the time format (12 or 24 hour mode). When in 12-hour format, the temperature will be in °F. When in 24-hour mode, the temperature will be in °C. [. . . ] 15 SPECIFICATIONS FOR WT-5442 Temperature: Measuring range: 32°F to 122°F with 0. 2°F resolution (indoor) -21. 8°F to 140°F with 0. 2°F resolution (outdoor) (0°C to 50°C with 0. 1°C resolution) Checking intervals: Every 10 seconds indoor, 3 times in 10 minutes for remote temperature. Power source: AC Adapter (included) Input: 120VAC/60Hz Output: DC 6V/100MA Battery type: Station: 3 x AA, 1. 5V (Alkaline) (optional) Sensor: 2 x AA, 1. 5V (Alkaline) Battery life: Approximately 12 months, depending on projection and backlight use 5. 5"W x 4"H x 1. 5"L Dimensions (L x W x H): WARRANTY INFORMATION La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this product. To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem determination and service procedures. [. . . ]