User manual LA CROSSE TECHNOLOGY 9049U

[. . . ] WS-9049 WEATHER STATION Instruction Manual TABLE OF CONTENTS Topic Inventory of Contents Features Setting up WWVB radio controlled time Function keys LCD screen Manual settings LCD contrast Time Zone Setting Daylight saving time ON/OFF Time reception ON/OFF 12/24 hour time display Manual time setting Calendar setting 1 Page 3 4 6 14 15 18 19 20 20 21 22 23 23 24 Temperature measuring units (ºF/ºC) Air pressure measuring Units (inHg/hPa) Relative pressure setting Forecast sensitivity setting Alarm (setting and snooze) Moon phases Indoor temperature and humidity Comfort indicator Toggling and resetting the indoor data Weather forecast tendency and icons Air pressure history (bar graph) Outdoor temperature and humidity Toggling and resetting the outdoor data 915MHz reception Mounting Care and Maintenance Specifications Warranty Information 2 26 26 27 28 29 30 31 32 33 34 37 38 39 41 42 45 46 48 FEATURES: This product offers: INSTANT TRANSMISSION is the state-ofthe-art new wireless transmission technology, exclusively designed and developed by LA CROSSE TECHNOLOGY. INSTANT TRANSMISSION offers you an immediate update (every 4 seconds!) of all your outdoor data measured from the transmitters: follow your climatic variations in real-time! The Weather Station Hanging hole LCD Display Battery compartment Function keys Foldable stands INVENTORY OF CONTENTS 1. Thermo/hygro transmitter (TX29UD-TH-IT) 3. Instruction manual WWVB Radio controlled time with manual set option Time reception ON/OFF (user selectable) 12/24 hour time display Time zone option ±12 hours Daylight saving time (DST On/Off) 3 4 Displays Weekday with Date Alarm with snooze function Displays 12 Moon phases throughout the year Weather forecasting with weather tendency indicator Indoor comfort indicator Temperature display in °F/°C Indoor & outdoor temp w\ MIN/MAX and time of measurement Humidity data display as RH% Indoor and outdoor humidity with MIN/MAX records Relative air pressure hPa/ inHg with adjustable reference value Weather icon sensitivity setting Relative air pressure history for the past 24 hours (electronic barometer with barometric pressure trend) LCD contrast selectable Can receive up to 3 outdoor transmitters Wireless transmission at 915 MHz Signal reception intervals at 4 seconds Low battery indicator Table standing or wall mounting Thermo-Hygro Transmitter Remote transmission of outdoor temperature and humidity to weather station by 915 MHz signals Alternate display of temperature and humidity display Water-resistant casing Wall mounting case. [. . . ] Confirm with the SET key and enter the Air pressure unit setting. The default relative pressure value is 29. 92 inHg (1013 hPa). This can be manually set to another value within the range of 28. 35 ­ 30. 72 inHg (960 ­ 1040 hPa) for a better reference. AIR PRESSURE UNIT SETTING (hPa / inHg): The pressure display can be selected to show relative air pressure in hPa or inHg (default is "inHg"). Flashing Flashing 1. 2. The current relative pressure value will start flashing Use the OUT/+ key to increment and IN key to decrement the value. Holding the key allows the value to advance faster. 27 28 3. Confirm with the SET key and enter the Weather forecast icon sensitivity setting. TO EXIT THE MANUAL SETTING MODE To exit the manual setting mode anytime during the manual setting, press the SNOOZE/CH key or wait for automatic timeout. The mode will return to normal time display. WEATHER FORECASTING ICON SENSITIVITY SETTING: For locations with rapid changes of weather conditions, the weather icons sensitivity can be set to a different level for faster display of weather conditions. ALARM SETTING: Alarm icon Alarm time Flashing The alarm time can be set when pressing the ALM/DATE key. Press and hold the ALM/DATE key to enter the alarm set mode. Use the OUT/+ key to set the alarm minute. Confirm with SNOOZE/CH key and exit the Alarm setting. The icon (()) will be displayed along with the set alarm time. 1. 2. 3. The current sensitivity value will start flashing. Use the OUT/+ key to set the weather sensitivity level. There are 3 levels of sensitivity: 2, 3 and 4. The value corresponds to the change of air pressure in hPa before the weather icon will switch to another state. Level 2 is the most sensitive setting (coastline); level 4 is the slowest (desert) recording setting (default setting is "3"). Confirm with the SET key and exit the Manual settings. 4. 29 30 Note: If the calendar is displayed in the Weather station, the alarm is NOT active. To view and activate the alarm, press the ALM/DATE key. The alarm icon (()) and the alarm time will be displayed, indicating that the alarm setting is activated. The maximum alarm ring duration is 2 minutes. MOON PHASES SYMBOL The Moon icon of the Weather station will also display all 12 Moon phases throughout the year according to the set calendar. SNOOZE SETTING AND STOPPING THE ALARM: The 10 minute snooze function can be set when the alarm is ringing by pressing the SNOOZE/CH key. When the alarm is snoozing, the alarm icon (()) will remain flashing indicating that the alarm is active but is in Snooze mode. To stop the snooze function when it is in snooze period, press any key except the SNOOZE/CH key. To stop the alarm, press any key (except for SNOOZE/CH). New Moon Small Waxing Crescent Large First Waxing Quarter Crescent Small Waxing Gibbous Large Waxing Gibbous Small Waning Crescent Large Waning Crescent Last Quarter Small Waning Gibbous Large Waning Gibbous Full Moon 31 32 INDOOR RELATIVE HUMIDITY AND INDOOR TEMPERATURE: The indoor temperature and humidity data and the indoor comfort indicator are automatically updated and displayed on the second section of the LCD. MAX icon Indoor temperature in °C or ºF Indoor relative humidity in RH% TOGGLING AND RESETTING THE INDOOR READINGS: 1. [. . . ] To receive warranty service, the purchaser 47 48 must contact La Crosse Technology, Ltd for problem determination and service procedures. Warranty service can only be performed by a La Crosse Technology, Ltd authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to La Crosse Technology, Ltd or La Crosse Technology, Ltd's authorized service center. La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. [. . . ]