User manual LA CROSSE TECHNOLOGY EA-3010

[. . . ] This innovative product provides wind speed, wind chill and temperature information for any outdoor activity. The operation of this product is simple and straightforward and by reading this operating manual, users will receive the optimum benefits of all its features. The Anemometer Impeller + key MODE/ key Current wind speed Maximum wind speed Since power on Average wind speed Since power on Battery cover To toggle between current wind speed, maximum wind speed and average wind speed, simply press the "+" key: Beaufort wind scale (bft) Features: · · · · · · · · Wind speed measure in mph, Km/h, m/s or Knots Wind speed in Beaufort wind scale bar graph Wind chill display Temperature display in degrees Fahrenheit or Celsius LCD backlight Auto power OFF Neck band included Weather resistant casing The Beaufort scale is displayed in bar graph (0-12). This is a system for estimating wind force without the use of instruments based on the visible effects of the wind on the physical environment. Force 0 1 2 3 4 5 6 7 8 9 10 11 12 Description Calm Light Air Light Breeze Gentle Breeze Moderate Breeze Fresh Breeze Strong Breeze Near Gale Gale Strong Gale Storm Violent Storm Hurricane Kts 0 1 4 7 11 17 22 28 34 41 48 56 64 m/s 0 0. 5 2. 1 3. 6 5. 7 8. 8 11. 3 14. 4 17. 5 21. 1 24. 7 28. 8 32. 9 Km/h 0 1. 8 7. 4 13. 0 20. 4 31. 5 40. 8 51. 8 63. 0 75. 9 88. 9 103. 7 118. 5 mph 0 1. 1 4. 6 8. 1 12. 7 19. 6 25. 4 32. 3 39. 2 47. 2 55. 3 64. 5 73. 7 Setting up: 1. [. . . ] Contact La Crosse Technology immediately upon discovery of any defects covered by this warranty. Before sending the anemometer in for repairs, contact La Crosse Technology. The anemometer will be repaired or replaced with the same or similar model during the warranty period. This warranty does not cover any defects resulting from improper use, unauthorized repairs or faulty batteries. LA CROSSE TECHNOLOGY WILL NOT ASSUME LIABILITY FOR INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE OPERATION OR MALFUNCTION OF THIS ANEMOMETER. THIS PRODUCT IS NOT TO BE USED FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMATION. This warranty gives you specific legal rights. You may also have other rights specific to your State. Some States do no allow the exclusion of consequential or incidental damages therefore the above exclusion of limitation may not apply to you. For warranty work, technical support, or information contact: La Crosse Technology 2809 Losey Blvd. La Crosse, WI 54601 Phone: 608. 782. 1610 Fax: 608. 796. 1020 e-mail: support@lacrossetechnology. com (warranty work) sales@lacrossetechnology. com (information on other products) web: www. lacrossetechnology. com 2. °C and °F setting: 1. Following from the measurement scale Setting °C will be flashing, use the "+" key to toggle °C and °F. Once the desired temperature unit has been chosen, press the "MODE/ " key to confirm and enter the "Average time for current speed measurement setting". Average time for current speed measurement setting The current wind speed can be measured in average wind speed in a time interval of 2-10 seconds 1. Following from the °C and °F Setting, press "+" key to set the desired average time. Once the desired average time has been chosen, press the "MODE/ " key to confirm and back to the normal mode. LCD backlight: The LCD backlight is automatically switched ON when any one of the 2 function keys are pressed and held down for 2 seconds. The backlight will be switched on for approximately 8 seconds before automatically switching OFF. Battery change: It is recommended to replace the battery in the unit on an annual basis to ensure optimum accuracy of this unit. Please help in the preservation of the environment. Return used batteries to an authorized depot. Maintenance: · Avoid placing anemometer in areas prone to vibration and shock as these may damage and inaccurate readings. [. . . ] We accept no liability for technical mistakes or printing errors, or their consequences. All trademarks and patents are acknowledged. Temperature checking interval Wind speed measuring range Power source Battery life Dimensions (L x W x H) Liability Disclaimer: · · · · · The manufacturer and supplier cannot accept any responsibility for any incorrect readings and any consequences that occur should an inaccurate reading take place. This product is not to be used for medical purposes or for public information. [. . . ]