User manual LA CROSSE TECHNOLOGY KCOMBO1 WS-9013U

[. . . ] WT-62U Digital Window Thermometer Features: · · · · · Clear functional design Easy to read outdoor temperature from indoors Maximum and minimum values with auto reset Easy to mount Weather resistant Specifications: Measuring range: Resolution: Temperature Updating Interval: Battery: Inserting the Battery: 1. The battery cover is located on the back of the thermometer. Using your fingers slide the battery cover off of the battery compartment. Observing the correct polarity insert one AAA battery into the battery compartment. [. . . ] 6. 7. Press and release the "SET" button to confirm the hour setting and to advance to the minute setting mode. Press and release the "CH" button to change the minutes--increasing the minutes by increments of 1 with each press of the "CH" button. Press and release the "SET" button to confirm the minutes and to advance to the Day, Date, and Year setting mode. Note: In 12h mode, "PM" will appear to the left of the time during PM hours. If the time is not within the PM hours, nothing will be displayed. Be sure to set the time to the correct AM/PM time to ensure automatic reception at optimal times. Press and hold the "SET" button for 3 seconds, or until "12 h" or "24 h" flashes in the DATE LCD. Press and release the "SET" button 5 more times to reach the Weekday setting mode. Note: "MO" (representing Monday) is the default setting for the weekday, "1. 1" is the default setting for the numeric month and day, and "1999" is the default setting for the year. The day, date, and year will be automatically set once the WWVB signal is received. However, the day, date, and year can be manually set and will flash respectively in the DATE LCD during manual programming. The weekday will be flashing in the DATE LCD, press and release the "CH" button to change the weekday. Press and release the "SET" button to confirm, and to enter the numeric-month setting mode. 4. 11 The numeric-month will be flashing in the DATE LCD. Press and release the "CH" button to select to the current month. Press and release the "SET" button to confirm the numericmonth, and to enter the numeric-day setting mode. The numeric-day will be flashing, press and release the "CH" button to select the current day. Press and release the "SET" button to confirm and to enter the year setting mode. The default-year will be flashing, press and release the "CH" to select the appropriate year. Press and release the "SET" button to confirm and to advance to the °F or °C setting mode. Press and hold the "SET" button for 3 seconds, or until "12h" or "24h" flashes in the DATE LCD. Press and release the "SET" button 9 times to reach the °F or °C setting mode. "°F" is the default setting, and should be flashing in the DATE LCD. Press and release the "CH" button to shift °F to °C and back. Press and release the "SET" button to confirm your selection and to advance to the LCD contrast setting. 5. 4. 7. 12 VIII. SETTING THE LCD CONTRAST 1. [. . . ] La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of La Crosse Technology, Ltd and must be returned to La Crosse Technology, Ltd. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer. La Crosse Technology, Ltd will pay all expenses for labor and materials for all repairs covered by this warranty. [. . . ]