User manual LA CROSSE TECHNOLOGY KCOMBO3 WS-9080U

[. . . ] Contents Language Page ___________________________________________________________________ English French Spanish 1 35 37 1 TABLE OF CONTENTS Topic Inventory of Contents Features Setting Up Battery Installation Function keys LCD Screen and Settings Atomic time -WWVB Radio Controlled Time Manual Settings Weather Forecast and Tendency Display of Indoor Temperature and Humidity Reading Display of Outdoor Temperature Reading Display of Outdoor Minimum and Maximum records Display of Indoor Minimum and Maximum records Ice Alarm 915 MHz Reception Mounting Care and Maintenance Specifications Warranty Information Page 3 4 6 8 10 12 14 15 20 22 22 23 24 26 27 28 31 32 33 2 This product offers: INSTANT TRANSMISSION is the state-ofthe-art new wireless transmission technology, exclusively designed and developed by LA CROSSE TECHNOLOGY. INSTANT TRANSMISSION offers you an immediate update (every 4 seconds!) of all your outdoor data measured from the transmitters: follow your climatic variations in real-time! INVENTORY OF CONTENTS 1. Wireless Weather Station Wireless Temperature Sensor (TX29U) and mounting bracket. Instruction Manual and Warranty Card. ADDITIONAL EQUIPMENT (not included) 1. [. . . ] The outdoor temperature and the signal reception icon should then be displayed on the Temperature Station. If this does not happen after 5 minutes, the batteries will need to be removed from both units and reset from step 1. In order to ensure sufficient 915 MHz transmission however, there should be no more than 330 feet (100 meters) between the final position of the Temperature Station and the sensor (see notes on "Mounting" and "915 MHz Reception"). Once the remote temperature has been received and displayed on the Temperature Station, the WWVB time code reception is automatically started. This takes typically between 3-5 minutes in good conditions--but may take up to 4 nights. If after 10 minutes, the WWVB time has not been received, press the SET key to manually enter a time initially. When more than one sensor is to be used 1. User shall remove all the batteries from the Temperature Station and sensors and wait 60 seconds if setting has been done with one sensor before. Insert the batteries to the first sensor. Within 60 seconds of powering up the first sensor, insert the batteries into to the 7 4. 5. Once the batteries are in place, all segments of the LCD will light up briefly. Following time as 12:00 and the indoor temperature will be displayed. If they are not shown in LCD after 60 seconds, remove the batteries and wait for at least 60 seconds before reinserting them. The outdoor temperature from the first sensor (channel 1) should then be displayed on the Temperature Station. Also, the signal reception icon will be displayed. If this does not happen after 2 minutes, the batteries will need to be removed from both units and reset from step 1. Insert the battery into the second sensor immediately after (within 30 seconds after) inserting battery to the Temperature Station. The outdoor temperature from the second sensor and the "channel 2" icon should then be displayed on the Temperature Station. If this does not happen after 2 minute, the batteries will need to be removed from all the units and reset from step 1. Insert the batteries into the third sensor immediately after (within 30 seconds after) inserting battery to the second sensor. Then within 2 minutes, the channel 3 outdoor data from the third sensor will be displayed and the channel icon will shift back to "1" once the third sensor is successfully received. If this is not happen, user shall restart the setting up from step 1. In order to ensure sufficient 915 MHz transmission there should be a distance of no more than 330 feet (100 meters) between the final position of the Temperature 8 Station and the sensor (see notes on "Mounting" and "915 MHz Reception"). [. . . ] To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem determination and service procedures. Warranty service can only be performed by a La Crosse Technology, Ltd authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to La Crosse Technology, Ltd or La Crosse Technology, Ltd's authorized service center. 38 La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of La Crosse Technology, Ltd and must be returned to La Crosse Technology, Ltd. [. . . ]