User manual LA CROSSE TECHNOLOGY WS-6003U-A

[. . . ] This Atomic Clock regulates the WWVB transmitter. QUICK SET-UP GUIDE 1) Insert two AA batteries into the Atomic Clock. 3) If there is no WWVB reception, manually set the time and date (instructions in the Program Mode). 5) Mount the WS-6003U in a suitable location, where WWVB signals can be received. [. . . ] V) TIME SETTING Note: When the WWVB signal is found, that time will over-ride the manually set time. 1) Hold down the "SET" button for 2 seconds (the selected time zone will flash), press the "SET" button 3 more times, until the hour "12:00" flashes in the time LCD. 2) Press and release the "+" button to select the hour. Note: when setting the hour, "PM" will appear to the left of the hour display, if it is AM nothing will be displayed. 3) Press and release the "SET" button to confirm the hour setting, and to shift to select the minutes. 4) Press and release the "+" button to select the minutes. 5) Press and release the "SET" button to confirm the time setting, and to advance to manually set the calendar. VI) CALENDAR SETTING Note: When the WWVB signal is found, that date will over-ride the manually set date. 1) Hold down the "SET" button for 2 seconds (the selected time zone will flash), press the "SET" button 5 more times, until the default year "00" flashes in the date LCD. 2) Press and release the "+" button to select the year. 3) Press and release the "SET" button to confirm the year, and to set the month. 6 4) The default month "1" will flash. Press and release the "+" button to select the appropriate month. 5) Press and release the "SET" button to confirm the month, and to set the date. 6) The default date "1" will flash. Press and release the "+" button to select the appropriate date. 7) Press and release the "SET" button to confirm the date, and to set the weekday. 8) The default weekday "MON" (depends on selected language) will flash. Press and release the "+" button to select the appropriate weekday. 9) Press and release the "SET" button to confirm the calendar settings, and to advance to select either 12 or 24-hour time display. VII) 12/24-HOUR SETTING 1) Hold down the "SET" button for 2 seconds (the selected time zone will flash), press the "SET" button 9 more times, until the "12" hour time display flashes in the time LCD. 2) Press and release the "+" button to toggle between 12 and 24 hour time. 3) Press and release the "SET" button to confirm the 12/24-hour time display, and to advance to select either °F or °C. [. . . ] TV sets, computers, or other radio controlled clocks. 4) Remove batteries for five minutes, reinsert and leave the unit alone overnight without pressing buttons. 5) If problems persist contact La Crosse Technology. Hour is incorrect (minute and date are correct). [. . . ]