User manual LA CROSSE TECHNOLOGY WS-7025U

[. . . ] WS-7025U Wireless 433 MHz Radio-controlled Weather Station Instruction Manual Topic Inventory of Contents/Additional Equipment About WWVB Quick Set-Up Guide Detailed Set-Up Guide Battery Installation Program Mode Function Keys 12/24 Hour Time Setting Time Zone Setting Daylight Saving Time Setting Time Setting (WWVB & Manual) Setting Day, Date and Year Selecting °F or °C Setting the LCD Contrast Features Back Light Weather Forecast Indoor Temperature, Humidity & Comfort Level Indicator Outdoor Temperatures Minimum & Maximum Records (Indoor, Outdoor & Resetting) Alarm (Setting, Snoozing & Stopping) Additional Remote Temperature Sensor Units (Set-Up, Viewing & Operation) Mounting Troubleshooting Maintenance & Care Specifications Warranty Information Page 3 4 5 6-7 7 7 7-8 8-9 9-10 10-11 11 11 12 12-13 14 14 14-15 16 17-18 18-20 21 22 23 24-25 2 Table Of Contents INVENTORY OF CONTENTS 1. 5. Time LCD Date LCD Forecast LCD Indoor LCD Outdoor LCD Mounting Bracket The weather station (Figure 1). One TX6U remote temperature sensor with mounting bracket (Figure 2). Three each, ½" Philips screws. [. . . ] A sad face icon will be displayed when the temperature and humidity are outside the mentioned ranges. OUTDOOR TEMPERATURE The outdoor temperature is viewed in the OUTDOOR LCD. When there is more than one remote temperature sensor unit in operation, a "boxed" number will appear to the right of the temperature. This indicates which remote temperature sensor unit (1, 2, or 3) is currently displaying its data in the OUTDOOR LCD. (This feature is explained in further detail in section VI--Adding Remote Temperature Sensors). MINIMUM AND MAXIMUM TEMPERATURE RECORDS The WS-7025U keeps a record of the MINIMUM and MAXIMUM temperature and the time and date of their occurrence--for both the indoor and outdoor modes. VIEWING THE INDOOR TEMPERATURE RECORDS 1. "MIN" appears in the uppercenter location of the flashing INDOOR LCD indicating that the minimum temperature, (along with the humidity measured at that time) and the time and date of occurrence are displayed. The minimum records will display for 20 seconds. Press the "IN" button again (once while "MIN" is still displayed, twice otherwise). "MAX" appears in the uppercenter location of the flashing INDOOR LCD indicating that the maximum temperature, (along with the humidity measured at that time) and the time and date of occurrence are displayed. While "MAX" is still displayed press the "IN" button again to return to the current data display. By waiting 20 seconds 2. 3. 14 during either the minimum or the maximum readings the unit will automatically return to current data readings. VIEWING THE OUTDOOR TEMPERATURE RECORDS 1. "MIN" appears in the uppercenter location of the flashing OUTDOOR LCD, indicating that the minimum temperature and the time and date of occurrence are displayed. The minimum records will display for 20 seconds. Press the "OUT" button again (once while "MIN" is still displayed, twice otherwise). "MAX" appears in the uppercenter location of the flashing OUTDOOR LCD, indicating that the maximum temperature and the time and date of occurrence are displayed. While "MAX" is still displayed press the "OUT" button again to return to the current data display. By waiting 20 seconds during either the minimum or the maximum readings the unit will automatically return to current data readings. 2. 3. C. RESETTING THE MIMIMUM AND MAXIMUM RECORDS 1. All the indoor records (minimum and maximum) will be reset after the "IN" button is pressed and held for 5 seconds. [. . . ] ("- -" displayed if outside this range. Every 10 seconds Every 1 minute Every 1 minute Every 5 minutes 80 feet (in open space) 2 x AA, IEC LR6, 1. 5V 2 x AA, IEC LR6, 1. 5V Approximately 12 months Alkaline 3. 2" x 1. 1" x 5. 7" (81 x 30 x 145mm) 1. 57" x 0. 9" x 5. 04" (40 x 23 x 128 mm) 23 WARRANTY INFORMATION La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this product. To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem determination and service procedures. [. . . ]