User manual LA CROSSE TECHNOLOGY WS-7026U

[. . . ] WS-7026U Wireless 433 MHz Radio-Controlled Weather Station Instruction Manual Topic Inventory of Contents/Additional Equipment About WWVB Quick Set-Up Guide Detailed Set-Up Guide Battery Installation Program Mode Function Keys 12/24 Hour Time Setting Time Zone Setting Daylight Saving Time Setting Time Setting (WWVB & Manual) Setting Day, Date and Year Selecting °F or °C Setting the LCD Contrast Features Back Light Weather Forecast Icons Indoor Temperature, Humidity & Comfort Level Indicator Outdoor Temperature & Humidity Minimum & Maximum Records (Indoor, Outdoor & Resetting) Alarm (Setting, Snoozing & Stopping) Additional Remote Control Sending Units (Set-Up, Viewing & Operation) Mounting Troubleshooting Maintenance & Care Specifications Warranty Information 2 Page 3 4-5 5 5-6 7 7 7-8 8 9-10 10 11 11 12 12-13 14 14 14-15 15-16 16-18 18-20 21 22 23 24 TABLE OF CONTENTS INVENTORY OF CONTENTS 1. One TX4U Thermo Hygro Sensor with mounting bracket (Figure 2). Three each ½" Philips screws. Instruction Manual and Warranty Card. Figure 1 Time LCD Date LCD Forecast LCD Indoor LCD Outdoor LCD Figure 2 ADDITIONAL EQUIPMENT (not included) 1. [. . . ] The weather icons change when the unit detects a change in air pressure. "MIN" appears in the upper-center location of the flashing INDOOR LCD, indicating that the minimum temperature (along with the humidity measured at that time) and the time and date of occurrence are displayed. The minimum records will display for 20 seconds. Press the IN button again (once while "MIN" is still displayed, twice otherwise). "MAX" appears in the upper-center location of the flashing INDOOR LCD, indicating that the maximum temperature (along with the humidity measured at that time) and the time and date of occurrence are displayed. While "MAX" is still displayed, press the IN button again to return to the current data display. Or you can wait 20 2. 3. 13 seconds, during either the minimum or the maximum readings, and the unit will automatically return to current data readings. VIEWING THE OUTDOOR TEMPERATURE RECORDS 1. "MIN" appears in the uppercenter location of the flashing OUTDOOR LCD, indicating that the minimum temperature, the time and date of occurrence are displayed. The minimum records will display for 20 seconds. Press the OUT button again (once while "MIN" is still displayed, twice otherwise). "MAX" appears in the uppercenter location of the flashing OUTDOOR LCD, indicating that the maximum temperature, the time and date of occurrence are displayed. While "MAX" is still displayed, press the OUT button again to return to the current data display. Or you can wait 20 seconds, during either the minimum or the maximum readings, and the unit will automatically return to current data readings. 2. 3. C. RESETTING THE MIMIMUM AND MAXIMUM RECORDS 1. All the Indoor records (minimum and maximum) will be reset after the IN button is pressed and held for 5 seconds. All the Outdoor records (minimum and maximum) will be reset after the OUT button is pressed and held for 5 seconds. VI. SETTING THE ALARM (alarms 1 and 2) Note: There are two alarms that can set. Each alarm will sound for a complete duration of 2 minutes. Press and hold the AL1 button for 5 seconds or until the alarm-time display flashes in the DATE LCD. 14 2. 5. 6. 7. Press the IN button to set the alarm hours and the OUT button to set the alarm minutes. Press the AL1 button or wait 15 seconds for the unit to automatically confirm the alarm time and return to display the date in the DATE LCD as normal. [. . . ] ("- -" displayed if outside this range) Every 10 seconds Every 1 minute Every 1 minute Every 3 minutes 80 feet (in open space) 2 x AA, IEC LR6, 1. 5V 2 x AA, IEC LR3, 1. 5V Approximately 12 months Alkaline 3. 2 x 1. 1 x 5. 7 in (81 x 30 x 145mm) 1. 56 x 0. 78 x 4. 29 inches (40 x 20 x 110 mm) 22 WARRANTY INFORMATION La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this product. To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem determination and service procedures. Warranty service can only be performed by a La Crosse Technology, Ltd authorized service center. [. . . ]