User manual LA CROSSE TECHNOLOGY WS-7038UF

[. . . ] WS-7038U Wireless 433 MHz Miniature Rain Monitor Instruction Manual TABLE OF CONTENTS Topic Inventory of Contents/ Additional Equipment Quick Set-Up Guide Detailed Set-Up Guide Battery Installation Program Mode Function Buttons Time Setting Date Setting Weekday Setting Rain Alarm Setting Resetting Total Rain Amount Features & Operations Bar Graph Numerical Representation of the Bar Graph Manual Reset of Rain Multiplicator Complete Resetting of Precipitation Data Reception Requirements Icons Mounting Maintenance & Care Troubleshooting Specifications Warranty Information Page 3 3 4 5 5 5 6 6 6 7 8 8 9 9 9 10-11 11 12 13 14-16 2 INVENTORY OF CONTENTS 1) WS-7038U--Wireless Rain Monitor with table stand. 2) TX5U--Wireless Rainfall Sensor: includes a base, rainfall collector, and two mounting screws. 3) Instruction manual and warranty card. Figure 1 Figure 2 Function Buttons ADDITIONAL EQUIPMENT (not included) 1) Two fresh 1. 5V AAA batteries. QUICK SET-UP GUIDE Insert two AA batteries into the Rainfall Sensor. [. . . ] The information that is displayed in column "0" is renewed every Monday at midnight, and the information contained in the columns is shifted to the left. If "MONTHLY" is selected, the graph will display the rainfall history for the past 6 months. The information displayed in column "0" is renewed on the first day of every month, at midnight. The information contained in the columns is shifted to the left. 7 II) NUMERICAL REPRESENTATION OF THE BAR GRAPH The bar graph displays the columns sequentially from "0" to "6" until all columns are showing. Then they are hidden again, and the sequential display is repeated. It is possible to read each column one at a time, simultaneously displaying the numeric measurement for that column above the bar graph. For example, the weekly rainfall total from 3 weeks ago may be viewed. Also, the numeric data from each column will correspond to the preveouly selected history ("DAILY, " "WEEKLY, " or "MONTHLY"). To view individual totals from the last six periods: 1. Hold down the HISTORY/+ button for 2 seconds. The numeric data from column "0" should appear at the top of the LCD screen, with the "RAINFALL" icon displayed above the data. Press the HISTORY/+ button again, column "1" will be highlighted, and the numeric data will be displayed above the bar graph. Continue to press the HISTORY/+ button until the data from each column (0 through 6) has been displayed. Pressing the HISTORY/+ button once more, after viewing the data from column 6, will exit this mode--returning to normal operation. 2. 4. III) MANUAL RESET OF THE RAIN MULTIPLICATOR Note: The rain multiplicator is the amount of rain needed to tip the teeter-totter bucket (inside the rain gauge). The multiplicator is preset to a value of "105" (0. 0105 inches per tip); this number produces the most accurate rainfall measurement. There is no need to manually set this number unless it has been changed. Remove the batteries and wait 30 seconds. This will reset the 1-hour rainfall total, but the bar graph and other totals will remain. Checking the polarity, install batteries. During the brief 2 seconds that the LCD screen lights up, hold down the HISTORY/+ button, until "105" appears in the LCD (the "5" will be flashing). If the multiplicator is not 105; use the HISTORY/+ button to to change the last digit to a 5. [. . . ] Problem: 1) Manually change the rain multiplicator number to 105, following Solution: instructions in section II, under Features & Operations. Note: For any questions not answered, contact La Crosse Technology with the contact information found at the end of this instructional manual. 12 SPECIFICATIONS Recommended operating temperature: Rain Monitor: 32°F to 122°F (0°C to 50°C) Rainfall Sensor: 32°F to 122°F (0°C to 50°C) For the previous 6 days, 6 weeks, 6 months, Rainfall Totals: plus current day, week, or month Data Check Intervals: Receiver checking interval: Every 5 minutes Rainfall Sensor checking interval: Every minute if no rain, immediately when rain begins Transmission frequency: 433. 92 MHz Maximum transmission range: 80 feet (25m) Power supplies (Alkaline battery recommended): Rain monitor: 2 x AAA, IEC LR3, 1. 5V batteries Rainfall Sensor: 2 x AA, IEC LR6, 1. 5V batteries Dimensions (L x W x H): Rain monitor (without stand): 3. 54 x 0. 86 x 4. 13in (90 x 22 x 105mm) Rainfall Sensor: 5. 19in diameter x 7. 20in high (132mm diameter x 183mm high) 13 WARRANTY INFORMATION La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this product. To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem determination and service procedures. [. . . ]