User manual LA CROSSE TECHNOLOGY WS-7042TWC

[. . . ] WS-7042TWC Wireless 433 MHz Weather Station with Forecast Instruction Manual TABLE OF CONTENTS Topic Inventory of Contents/Additional Equipment Quick Set-Up Guide Detailed Set-Up Guide Battery Installation Program Mode Function Keys Time Setting Features Weather Forecast Indoor Temperature and Humidity Outdoor Temperatures Minimum & Maximum Records (Indoor, Outdoor & Resetting) Additional Remote Temperature Sensor Units (Set-Up, Viewing & Operation) Mounting Troubleshooting Maintenance & Care Specifications Warranty Information Page 3 4 5 6 6 7-8 9 9 9 10-11 12-13 14 15 16 17-18 2 INVENTORY OF CONTENTS 1. One TX6U remote temperature sensor with mounting bracket (Figure 2). Three each, ½" Philips screws. Instruction manual and warranty card. Figure 2 Time LCD Indoor LCD Forecast LCD Outdoor LCD Mounting Bracket Figure 1 ADDITIONAL EQUIPMENT (not included) 1. [. . . ] An arrow pointing down indicates that the air pressure is decreasing and the weather is expected to become worse or remain poor. Indoor Temperature and Humidity The current indoor relative humidity (viewed below the time) and temperature (viewed below the relative humidity) are displayed in the INDOOR LCD. Outdoor Temperature The outdoor temperature is viewed in the OUTDOOR LCD. When there is more than one remote temperature sensor unit in operation, a arrow will appear above the CH 1 2 3 area at the bottom of the LCD. This indicates which remote temperature sensor unit (1, 2 or 3) is currently displaying its data in the OUTDOOR LCD. (This feature is explained in further detail in section V--Adding Remote Temperature Sensors). Minimum and Maximum Temperature Records The WS-7042TWC keeps a record of the MINIMUM and MAXIMUM temperature for both the indoor and outdoor modes. Viewing Minimum and Maximum Temperature Records 1. Press and release the "MIN/MAX/RESET" button. MAX will appear below the indoor temperature. The maximum recorded indoor and outdoor temperatures will be displayed in their respective areas. Press and release the "MIN/MAX/RESET" button. MIN will appear below the indoor temperature. The maximum recorded indoor and outdoor temperatures will be displayed in their respective areas. 8 7. 8. Press and release the "MIN/MAX/RESET" button. The current indoor and outdoor temperatures will be displayed in their respective areas. B. Resetting the Minimum and Maximum Temperature Records Press and hold the "MIN/MAX/RESET" button for 5 seconds to reset the minimum and maximum recorded temperatures. Adding Remote Sensors (optional) The WS-7042TWC is able to receive signals from 3 different remote temperature sensors. The remote temperature sensor model(s) that you choose will come with their own set of instructions. Follow these instructions for a complete guide to setting up. Following are some brief instructions for the basic set-up of remote temperature sensor units with the WS-7042TWC. These extra remote temperature sensors can be purchased through the same dealer as this unit, or by contacting La Crosse Technology directly. [. . . ] However, the difference can be exaggerated further because the sensors are designed for different working environments. The indoor sensor is less responsive to ambient air currents because of the shielding effect of the display's case. In addition, the case can act as a heat sink to absorb and store heat from external sources (i. e. Also, the much greater range of the outdoor temperature sensor requires a different calibration curve than the indoor range. [. . . ]